Linux version 2.6.24.4-grsec (root@envy) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Mar 25 22:42:48 CET 2008 Command line: root=/dev/mapper/vg01-root ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable) BIOS-e820: 00000000cfe70000 - 00000000cfe80000 (ACPI data) BIOS-e820: 00000000cfe80000 - 00000000cfe83000 (ACPI NVS) BIOS-e820: 00000000cfe83000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) Entering add_active_range(0, 0, 156) 0 entries of 256 used Entering add_active_range(0, 256, 851568) 1 entries of 256 used Entering add_active_range(0, 1048576, 2293760) 2 entries of 256 used end_pfn_map = 2293760 DMI present. ACPI: RSDP 000F6B40, 0024 (r2 PTLTD ) ACPI: XSDT CFE76909, 0064 (r1 PTLTD XSDT 6040000 LTP 0) ACPI: DMAR CFE7FCF8, 0098 (r1 Intel OEMDMAR 6040000 LOHR 1) ACPI: FACP CFE7FD90, 00F4 (r3 INTEL 6040000 PTL 2) ACPI: DSDT CFE793A1, 68E3 (r1 INTEL BEARLAKE 6040000 MSFT 2000001) ACPI: FACS CFE82FC0, 0040 ACPI: MCFG CFE7FE84, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: HPET CFE7FEC0, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC CFE7FEF8, 0090 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT CFE7FF88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SPCR CFE7FFB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: SSDT CFE7696D, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) Entering add_active_range(0, 0, 156) 0 entries of 256 used Entering add_active_range(0, 256, 851568) 1 entries of 256 used Entering add_active_range(0, 1048576, 2293760) 2 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293760 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 156 0: 256 -> 851568 0: 1048576 -> 2293760 On node 0 totalpages: 2096652 DMA zone: 56 pages used for memmap DMA zone: 3090 pages reserved DMA zone: 850 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833192 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 5, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 13880 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062202 Kernel command line: root=/dev/mapper/vg01-root ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2394.000 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x96cb000 - 0xd6cb000 Memory: 8166936k/9175040k available (6277k kernel code, 219200k reserved, 3402k data, 300k init) Calibrating delay using timer specific routine.. 4791.38 BogoMIPS (lpj=9582760) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 16624988 Detected 16.624 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=9575971) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=9576006) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=9576012) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Brought up 4 CPUs net_namespace: 120 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 8914.000 MB/sec xor: using function: generic_sse (8914.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e10fffff ACPI: EC: Look up EC in DSDT ACPI Error (psargs-0355): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff81022fc50c90), AE_NOT_FOUND ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff81022fc50bb0), AE_NOT_FOUND ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Error (psargs-0355): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff81022fc50c90), AE_NOT_FOUND ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff81022fc50bb0), AE_NOT_FOUND ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active) ACPI Error (psargs-0355): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff81022fc50c90), AE_NOT_FOUND ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff81022fc50bb0), AE_NOT_FOUND pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 pnp: the driver 'system' has been registered system 00:01: ioport range 0x295-0x296 has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1180-0x11bf has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0xfe00-0xfe00 has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved system 00:01: driver attached PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d8100000-d81fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: 2000-2fff MEM window: d8000000-d80fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: 3000-3fff MEM window: d8200000-d82fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: d8300000-d83fffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2874k freed Simple Boot Flag at 0x36 set to 0x1 IA-32 Microcode Update Driver: v1.14a VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) DLM (built Mar 25 2008 22:40:58) installed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/W]. fuse init (API version 7.9) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Mar 25 2008 22:41:20) installed Lock_Nolock (built Mar 25 2008 22:41:27) installed Lock_DLM (built Mar 25 2008 22:41:26) installed async_tx: api initialized (sync-only) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) 0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 Boot video device is 0000:11:03.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] vga16fb: initializing vga16fb: mapped to 0xffff8100000a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: SSDT CFE77D72, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) ACPI: SSDT CFE77F4F, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) ACPI: SSDT CFE780BD, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) ACPI: SSDT CFE7822B, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Error (psargs-0355): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff81022fc50c90), AE_NOT_FOUND ACPI Error (psargs-0355): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff81022fc50bb0), AE_NOT_FOUND Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 ipmi message handler version 39.1 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:08: driver attached 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial 00:09: driver attached RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: module loaded nbd: registered device at major 43 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0d:00.0 to 64 e1000: 0000:0d:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:62:89:fa e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0f:00.0 to 64 e1000: 0000:0f:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:62:89:fb e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. Ethernet Channel Bonding Driver: v3.2.3 (December 6, 2007) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xd8601000 port 0xd8601100 irq 379 ata2: SATA max UDMA/133 abar m2048@0xd8601000 port 0xd8601180 irq 379 ata3: SATA max UDMA/133 abar m2048@0xd8601000 port 0xd8601200 irq 379 ata4: SATA max UDMA/133 abar m2048@0xd8601000 port 0xd8601280 irq 379 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg3 type 0 pata_it8213 0000:11:04.0: version 0.0.3 ACPI: PCI Interrupt 0000:11:04.0[A] -> GSI 23 (level, low) -> IRQ 23 scsi4 : pata_it8213 scsi5 : pata_it8213 ata5: PATA max UDMA/66 cmd 0x4420 ctl 0x4414 bmdma 0x4400 irq 23 ata6: DUMMY ata5.01: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33 ata5.01: configured for UDMA/33 scsi 4:0:1:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:1:0: Attached scsi CD-ROM sr0 sr 4:0:1:0: Attached scsi generic sg4 type 5 aoe: AoE v32 initialised. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd8601800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd8601c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller usb 1-1: new high speed USB device using ehci_hcd and address 2 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:05: disabling not supported rtc_cmos: probe of 00:05 failed with error -16 max6902 spi driver i2c /dev entries driver ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 i2c-parport-light: adapter type unspecified usbcore: registered new interface driver i2c-tiny-usb w83627hf: Found W83627HF chip at 0x290 applesmc: supported laptop not found! applesmc: driver init failed (ret=-19)! coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong! f71882fg: Not a Fintek device f71882fg: Not a Fintek device hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! pc87360: PC8736x not detected, module not inserted. md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int64x1 2241 MB/s raid6: int64x2 2730 MB/s raid6: int64x4 2582 MB/s raid6: int64x8 1687 MB/s raid6: sse2x1 4164 MB/s raid6: sse2x2 4221 MB/s raid6: sse2x4 7113 MB/s raid6: using algorithm sse2x4 (7113 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver pktgen v2.69: Packet Generator for packet performance testing. GACT probability on Mirror/redirect action on Simple TC action Loaded netem: version 1.2 u32 classifier Performance counters on input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP westwood registered TCP highspeed registered TCP hybla registered TCP htcp registered TCP vegas registered TCP veno registered TCP scalable registered TCP lp registered TCP yeah registered TCP illinois registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered RPC: Registered udp transport module. RPC: Registered tcp transport module. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller CCID: Registered CCID 3 (ccid3) CCID: Registered CCID 2 (ccid2) SCTP: Hash tables configured (established 65536 bind 65536) TIPC: Activated (version 1.6.2 compiled Mar 25 2008 22:42:31) NET: Registered protocol family 30 TIPC: Started in single node mode drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Freeing unused kernel memory: 300k freed e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready scsi 6:0:0:0: Direct-Access Pretec 01GB Tiny 1.20 PQ: 0 ANSI: 2 sd 6:0:0:0: [sde] 2007040 512-byte hardware sectors (1028 MB) sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 00 00 00 00 sd 6:0:0:0: [sde] Assuming drive cache: write through sd 6:0:0:0: [sde] 2007040 512-byte hardware sectors (1028 MB) sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 00 00 00 00 sd 6:0:0:0: [sde] Assuming drive cache: write through sde: sde1 sd 6:0:0:0: [sde] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg5 type 0 usb-storage: device scan complete md: md0 stopped. md: bind md: bind md: bind md: bind raid5: device sda1 operational as raid disk 0 raid5: device sdd1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 1 raid5: allocated 4274kB for md0 raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdd1 eth0: no IPv6 routers present ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names ReiserFS: dm-3: found reiserfs format "3.6" with standard journal ReiserFS: dm-3: using ordered data mode ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-3: checking transaction log (dm-3) ReiserFS: dm-3: Using r5 hash to sort names Adding 8388600k swap on /dev/mapper/vg01-swap. Priority:-1 extents:1 across:8388600k ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:0a:24:f9/00:00:00:00:00/a9 Emask 0x1 (device error) ata2.00: status: { DRDY ERR } ata2.00: error: { ABRT } ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:0a:24:f9/00:00:00:00:00/a9 Emask 0x1 (device error) ata2.00: status: { DRDY ERR } ata2.00: error: { ABRT } ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:0a:24:f9/00:00:00:00:00/a9 Emask 0x1 (device error) ata2.00: status: { DRDY ERR } ata2.00: error: { ABRT } ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:0a:24:f9/00:00:00:00:00/a9 Emask 0x1 (device error) ata2.00: status: { DRDY ERR } ata2.00: error: { ABRT } ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 51/04:00:0a:24:f9/00:00:00:00:00/a9 Emask 0x1 (device error) ata2.00: status: { DRDY ERR } ata2.00: error: { ABRT } ata2.00: configured for UDMA/133 ata2: EH complete sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA