Linux version 2.6.27.48 (root@server) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Wed Jul 14 08:58:54 CEST 2010
Command line: root=/dev/mapper/root ro console=tty0
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
 BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
 BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
 BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
 BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x1c0000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbf680 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf680000 page 4k
kernel direct mapping tables up to bf680000 @ 10000-15000
last_map_addr: bf680000 end: bf680000
init_memory_mapping
 0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ 13000-1b000
last_map_addr: 1c0000000 end: 1c0000000
RAMDISK: 37d72000 - 37fefb7e
ACPI: RSDP 000FAE10, 0024 (r2 ACPIAM)
ACPI: XSDT BF680100, 005C (r1 090209 XSDT1858 20090902 MSFT       97)
ACPI: FACP BF680290, 00F4 (r3 090209 FACP1858 20090902 MSFT       97)
ACPI: DSDT BF6804B0, C3F1 (r1  A1146 A1146001        1 INTL 20060113)
ACPI: FACS BF698000, 0040
ACPI: APIC BF680390, 00D8 (r1 090209 APIC1858 20090902 MSFT       97)
ACPI: MCFG BF680470, 003C (r1 090209 OEMMCFG  20090902 MSFT       97)
ACPI: OEMB BF698040, 0072 (r1 090209 OEMB1858 20090902 MSFT       97)
ACPI: HPET BF68F4B0, 0038 (r1 090209 OEMHPET  20090902 MSFT       97)
ACPI: OSFR BF68F4F0, 00B0 (r1 090209 OEMOSFR  20090902 MSFT       97)
ACPI: SSDT BF69A140, 249F (r1 DpgPmm    CpuPm       12 INTL 20060113)
(7 early reservations) ==> bootmem [0000000000 - 01c0000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00009dc080]    TEXT DATA BSS ==> [0000200000 - 00009dc080]
  #3 [0037d72000 - 0037fefb7e]          RAMDISK ==> [0037d72000 - 0037fefb7e]
  #4 [000009c800 - 0000100000]    BIOS reserved ==> [000009c800 - 0000100000]
  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
  #6 [0000013000 - 0000016000]          PGTABLE ==> [0000013000 - 0000016000]
found SMP MP-table at [ffff8800000ff780] 000ff780
 [ffffe20000000000-ffffe200061fffff] PMD -> [ffff880028200000-ffff88002e3fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x000bf680
    0: 0x00100000 -> 0x001c0000
On node 0 totalpages: 1570316
  DMA zone: 1802 pages, LIFO batch:0
  DMA32 zone: 765624 pages, LIFO batch:31
  Normal zone: 775680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 0, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
PERCPU: Allocating 36064 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1543106
Kernel command line: root=/dev/mapper/root ro console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2672.723 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 6090780k/7340032k available (5038k kernel code, 189552k reserved, 1890k data, 356k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.44 BogoMIPS (lpj=26727230)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16<6>CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
Using local APIC timer interrupts.
APIC timer calibration result 8352258
Detected 8.352 MHz APIC timer.
Booting processor 1/2 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5381.17 BogoMIPS (lpj=26905887)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16<6>CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10726.62 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 1536 bytes
xor: automatically using best checksumming function: generic_sse
   generic_sse:  9969.200 MB/sec
xor: using function: generic_sse (9969.200 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f]
PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f]
PCI: 0000:00:1a.2 reg 20 io port: [bc00, bc1f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [f7eff000, f7eff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f7ef8000, f7efbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [b080, b09f]
PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
PCI: 0000:00:1d.2 reg 20 io port: [b480, b49f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f7efe000, f7efe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [ac00, ac07]
PCI: 0000:00:1f.2 reg 14 io port: [a880, a883]
PCI: 0000:00:1f.2 reg 18 io port: [a800, a807]
PCI: 0000:00:1f.2 reg 1c io port: [a480, a483]
PCI: 0000:00:1f.2 reg 20 io port: [a400, a41f]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [f7efc000, f7efc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [f7efd000, f7efd0ff]
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:01:00.0 reg 10 64bit mmio: [f7fffc00, f7fffc7f]
PCI: 0000:01:00.0 reg 18 64bit mmio: [f7ff8000, f7ffbfff]
PCI: 0000:01:00.0 reg 20 io port: [cc00, cc7f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [f7f00000, f7f7ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [c000, cfff]
PCI: bridge 0000:00:01.0 32bit mmio: [f7f00000, f7ffffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [fa000000, faffffff]
PCI: 0000:02:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 1c 64bit mmio: [f8000000, f9ffffff]
PCI: 0000:02:00.0 reg 24 io port: [dc00, dc7f]
PCI: 0000:02:00.0 reg 30 32bit mmio: [fbd80000, fbdfffff]
PCI: bridge 0000:00:03.0 io port: [d000, dfff]
PCI: bridge 0000:00:03.0 32bit mmio: [f8000000, fbdfffff]
PCI: bridge 0000:00:03.0 64bit mmio pref: [d0000000, dfffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f6f00000, f6ffffff]
PCI: 0000:04:00.0 reg 10 io port: [e800, e8ff]
PCI: 0000:04:00.0 reg 18 64bit mmio: [fbeff000, fbefffff]
PCI: 0000:04:00.0 reg 20 64bit mmio: [f6ef0000, f6efffff]
PCI: 0000:04:00.0 reg 30 32bit mmio: [fbec0000, fbedffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
PCI: bridge 0000:00:1c.2 io port: [e000, efff]
PCI: bridge 0000:00:1c.2 32bit mmio: [fbe00000, fbefffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [f6e00000, f6efffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff has been reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
Switched to high resolution mode on CPU 1
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xc000-0xcfff
pci 0000:00:01.0:   MEM window: 0xf7f00000-0xf7ffffff
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: 0xd000-0xdfff
pci 0000:00:03.0:   MEM window: 0xf8000000-0xfbdfffff
pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0:   IO window: disabled
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0xe000-0xefff
pci 0000:00:1c.2:   MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f6e00000-0x000000f6efffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [c000, cfff]
bus: 01 index 1 mmio: [f7f00000, f7ffffff]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [f8000000, fbdfffff]
bus: 02 index 2 mmio: [d0000000, dfffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [f6f00000, f6ffffff]
bus: 05 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [e000, efff]
bus: 04 index 1 mmio: [fbe00000, fbefffff]
bus: 04 index 2 mmio: [f6e00000, f6efffff]
bus: 04 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [0, 0]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 io port: [0, ffff]
bus: 06 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 2550k freed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 11902
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie01: allocate port service
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pci_express 0000:00:03.0:pcie01: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie01: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT BF6980C0, 0403 (r1 DpgPmm  P001Ist       11 INTL 20060113)
processor ACPI0007:00: registered as cooling_device0
ACPI: SSDT BF6984D0, 0403 (r1 DpgPmm  P002Ist       12 INTL 20060113)
processor ACPI0007:01: registered as cooling_device1
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Driver 'sd' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc100 irq 314
ata2: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc180 irq 314
ata3: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc200 irq 314
ata4: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc280 irq 314
ata5: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc300 irq 314
ata6: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc380 irq 314
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7
ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sata_sil24 0000:01:00.0: version 1.1
sata_sil24 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
sata_sil24 0000:01:00.0: setting latency timer to 64
scsi6 : sata_sil24
scsi7 : sata_sil24
ata7: SATA max UDMA/100 host m128@0xf7fffc00 port 0xf7ff8000 irq 28
ata8: SATA max UDMA/100 host m128@0xf7fffc00 port 0xf7ffa000 irq 28
ata7: SATA link down (SStatus 0 SControl 0)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata8.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/100
scsi 7:0:0:0: Direct-Access     ATA      WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:<3>ata8: failed to read log page 10h (errno=-2)
ata8.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00020002, device error via D2H FIS
ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
         res 51/04:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8: failed to read log page 10h (errno=-2)
ata8.00: NCQ disabled due to excessive errors
ata8.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
         res 51/04:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata8: EH complete
 unable to read partition table
sd 7:0:0:0: [sdb] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg1 type 0
aoe: AoE v47 initialised.
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7eff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.48 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7efe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.48 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-5: new high speed USB device using ehci_hcd and address 4
usb 2-5: configuration #1 chosen from 1 choice
usb 2-5: New USB device found, idVendor=03f0, idProduct=2b17
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: HP LaserJet 1020
usb 2-5: Manufacturer: Hewlett-Packard
usb 2-5: SerialNumber: JL053YT
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.48 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
Initializing USB Mass Storage driver...
usb 6-1: New USB device found, idVendor=046d, idProduct=c223
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Logitech G15 Keyboard
usb 6-1: Manufacturer: Logitech
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
usb 6-2: New USB device found, idVendor=1038, idProduct=0777
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: World of Warcraft MMO Gaming Mouse
usb 6-2: Manufacturer: SteelSeries
usb 6-1.1: new low speed USB device using uhci_hcd and address 4
usb 6-1.1: configuration #1 chosen from 1 choice
usb 6-1.1: New USB device found, idVendor=046d, idProduct=c221
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: Logitech Gaming Keyboard
usb 6-1.1: Manufacturer: Logitech
usb 6-1.4: new full speed USB device using uhci_hcd and address 5
usb 6-1.4: configuration #1 chosen from 1 choice
usb 6-1.4: New USB device found, idVendor=046d, idProduct=c222
usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.4: Product: G15 Keyboard
usb 6-1.4: Manufacturer: G15 Keyboard
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PC Speaker as /class/input/input3
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1   2415 MB/s
raid6: int64x2   3292 MB/s
raid6: int64x4   2211 MB/s
raid6: int64x8   2278 MB/s
raid6: sse2x1    6660 MB/s
raid6: sse2x2    7809 MB/s
raid6: sse2x4    8853 MB/s
raid6: using algorithm sse2x4 (8853 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
rtc_cmos 00:03: setting system clock to 2010-07-15 21:40:27 UTC (1279230027)
Freeing unused kernel memory: 356k freed
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
Buffer I/O error on device sdb, logical block 488378624
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
Buffer I/O error on device sdb, logical block 488378624
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
Buffer I/O error on device sdb, logical block 488378644
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
udevd version 125 started
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
__ratelimit: 5 callbacks suppressed
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
Buffer I/O error on device sdb, logical block 488378624
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 00 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907028992
Buffer I/O error on device sdb, logical block 488378624
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
Buffer I/O error on device sdb, logical block 488378644
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata8.00: irq_stat 0x00060002, device error via D2H FIS
ata8.00: cmd 25/00:08:a0:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error)
ata8.00: status: { DRDY ERR }
ata8.00: error: { ABRT }
ata8.00: configured for UDMA/100
sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 7:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        e8 e0 88 a0 
sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
end_request: I/O error, dev sdb, sector 3907029152
Buffer I/O error on device sdb, logical block 488378644
ata8: EH complete
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period