hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 12.628762] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d000 [ 12.628795] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.628797] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.628799] usb usb3: Product: UHCI Host Controller [ 12.628800] usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd [ 12.628802] usb usb3: SerialNumber: 0000:00:1a.1 [ 12.628854] usb usb3: configuration #1 chosen from 1 choice [ 12.628879] hub 3-0:1.0: USB hub found [ 12.628884] hub 3-0:1.0: 2 ports detected [ 12.628939] alloc irq_desc for 23 on node -1 [ 12.628941] alloc kstat_irqs on node -1 [ 12.628945] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 12.628962] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 12.628965] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.628972] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 12.632869] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 12.632882] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xed901000 [ 12.648507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 12.648525] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.648527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.648529] usb usb4: Product: EHCI Host Controller [ 12.648531] usb usb4: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd [ 12.648532] usb usb4: SerialNumber: 0000:00:1d.7 [ 12.648824] usb usb4: configuration #1 chosen from 1 choice [ 12.649091] hub 4-0:1.0: USB hub found [ 12.649097] hub 4-0:1.0: 6 ports detected [ 12.649155] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 12.649160] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 12.649163] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.649170] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 12.649196] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400 [ 12.649230] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.649232] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.649234] usb usb5: Product: UHCI Host Controller [ 12.649236] usb usb5: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd [ 12.649238] usb usb5: SerialNumber: 0000:00:1d.0 [ 12.649291] usb usb5: configuration #1 chosen from 1 choice [ 12.649321] hub 5-0:1.0: USB hub found [ 12.649326] hub 5-0:1.0: 2 ports detected [ 12.649373] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.649378] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 12.649381] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.649388] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 12.649423] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800 [ 12.649455] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.649457] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.649459] usb usb6: Product: UHCI Host Controller [ 12.649461] usb usb6: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd [ 12.649462] usb usb6: SerialNumber: 0000:00:1d.1 [ 12.649512] usb usb6: configuration #1 chosen from 1 choice [ 12.649537] hub 6-0:1.0: USB hub found [ 12.649542] hub 6-0:1.0: 2 ports detected [ 12.649588] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 12.649593] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 12.649596] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.649602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 12.649629] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00 [ 12.649661] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.649664] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.649666] usb usb7: Product: UHCI Host Controller [ 12.649667] usb usb7: Manufacturer: Linux 2.6.32-bpo.5-amd64 uhci_hcd [ 12.649669] usb usb7: SerialNumber: 0000:00:1d.2 [ 12.649718] usb usb7: configuration #1 chosen from 1 choice [ 12.649743] hub 7-0:1.0: USB hub found [ 12.649749] hub 7-0:1.0: 2 ports detected [ 12.652568] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.562464] ata7: SATA link down (SStatus 0 SControl 0) [ 17.562592] ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7 [ 17.562595] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 17.581333] ata1.00: configured for UDMA/133 [ 17.832611] ata12: SATA link down (SStatus 0 SControl 300) [ 17.832646] ata11: SATA link down (SStatus 0 SControl 300) [ 17.964133] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5 [ 18.016507] scsi0 : 3ware 9000 Storage Controller [ 18.017104] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xec000000, IRQ: 20. [ 18.352023] 3w-9xxx: scsi0: Firmware FE9X 2.08.00.005, BIOS BE9X 2.03.01.052, Ports: 12. [ 18.556034] ata2: SATA link down (SStatus 0 SControl 300) [ 18.956031] ata3: SATA link down (SStatus 0 SControl 300) [ 19.356031] ata4: SATA link down (SStatus 0 SControl 300) [ 19.756032] ata5: SATA link down (SStatus 0 SControl 300) [ 20.156032] ata6: SATA link down (SStatus 0 SControl 300) [ 22.436048] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 22.513661] ata8.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 22.588690] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 22.676823] ata8.00: configured for UDMA/100 [ 22.727997] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 23.043585] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 23.053081] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 23.053132] sd 8:0:0:0: [sdb] Write Protect is off [ 23.053135] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.053156] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.053290] sdb: [ 23.413902] sd 1:0:0:0: [sda] Write Protect is off [ 23.473603] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.473614] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 23.476530] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.476646] sda: [ 23.680128] ata8.00: irq_stat 0x00020002, device error via D2H FIS [ 23.680131] sda1 sda2 sda3 [ 23.789935] ata8.00: failed command: READ FPDMA QUEUED [ 23.790935] sd 1:0:0:0: [sda] Attached SCSI disk [ 23.906829] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in [ 23.906830] res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x401 (device error) [ 24.093401] ata8.00: status: { DRDY } [ 24.148721] ata8.00: configured for UDMA/100 [ 24.199886] ata8: EH complete [ 54.816035] ata8.00: NCQ disabled due to excessive errors [ 54.880667] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 54.965109] ata8.00: failed command: READ FPDMA QUEUED [ 55.026673] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in [ 55.026674] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 55.201808] ata8.00: status: { DRDY } [ 55.245685] ata8: hard resetting link [ 57.488050] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 57.571434] ata8.00: configured for UDMA/100 [ 57.622593] ata8: EH complete [ 57.658433] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 57.735530] ata8.00: irq_stat 0x00020002, device error via D2H FIS [ 57.809577] ata8.00: failed command: READ DMA [ 57.861783] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 57.861784] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 58.042115] ata8.00: status: { DRDY ERR } [ 58.090151] ata8.00: error: { ABRT } [ 58.144437] ata8.00: configured for UDMA/100 [ 58.195606] ata8: EH complete [ 58.231441] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 58.308543] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 58.382587] ata8.00: failed command: READ DMA [ 58.434792] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 58.434794] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 58.618349] ata8.00: status: { DRDY ERR } [ 58.666386] ata8.00: error: { ABRT } [ 58.720672] ata8.00: configured for UDMA/100 [ 58.771842] ata8: EH complete [ 58.807680] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 58.884778] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 58.958822] ata8.00: failed command: READ DMA [ 59.011028] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 59.011029] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 59.191362] ata8.00: status: { DRDY ERR } [ 59.239399] ata8.00: error: { ABRT } [ 59.293687] ata8.00: configured for UDMA/100 [ 59.344854] ata8: EH complete [ 59.380690] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 59.457789] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 59.531835] ata8.00: failed command: READ DMA [ 59.584040] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 59.584041] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 59.764375] ata8.00: status: { DRDY ERR } [ 59.812412] ata8.00: error: { ABRT } [ 59.866707] ata8.00: configured for UDMA/100 [ 59.917864] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 60.003552] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 60.092881] Descriptor sense data with sense descriptors (in hex): [ 60.167125] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 60.245025] 00 00 00 00 [ 60.284231] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 60.365972] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 60.449792] end_request: I/O error, dev sdb, sector 0 [ 60.510321] Buffer I/O error on device sdb, logical block 0 [ 60.577093] ata8: EH complete [ 60.612927] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 60.690028] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 60.764069] ata8.00: failed command: READ DMA [ 60.816277] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 60.816278] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 60.996612] ata8.00: status: { DRDY ERR } [ 61.044647] ata8.00: error: { ABRT } [ 61.098932] ata8.00: configured for UDMA/100 [ 61.150101] ata8: EH complete [ 61.185939] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 61.263039] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 61.337080] ata8.00: failed command: READ DMA [ 61.389287] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 61.389288] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 61.569624] ata8.00: status: { DRDY ERR } [ 61.617659] ata8.00: error: { ABRT } [ 61.671944] ata8.00: configured for UDMA/100 [ 61.723113] ata8: EH complete [ 61.758948] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 61.836051] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 61.910093] ata8.00: failed command: READ DMA [ 61.962301] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 61.962302] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 62.142635] ata8.00: status: { DRDY ERR } [ 62.190670] ata8.00: error: { ABRT } [ 62.244958] ata8.00: configured for UDMA/100 [ 62.296125] ata8: EH complete [ 62.331960] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 62.409061] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 62.483107] ata8.00: failed command: READ DMA [ 62.535312] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 62.535313] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 62.715647] ata8.00: status: { DRDY ERR } [ 62.763681] ata8.00: error: { ABRT } [ 62.817973] ata8.00: configured for UDMA/100 [ 62.869136] ata8: EH complete [ 62.904973] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 62.982074] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 63.056118] ata8.00: failed command: READ DMA [ 63.108323] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 63.108324] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 63.288657] ata8.00: status: { DRDY ERR } [ 63.336693] ata8.00: error: { ABRT } [ 63.390985] ata8.00: configured for UDMA/100 [ 63.442146] ata8: EH complete [ 63.477985] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 63.555087] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 63.629130] ata8.00: failed command: READ DMA [ 63.681335] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 63.681336] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 63.861671] ata8.00: status: { DRDY ERR } [ 63.909706] ata8.00: error: { ABRT } [ 63.963993] ata8.00: configured for UDMA/100 [ 64.015159] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 64.100847] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 64.190176] Descriptor sense data with sense descriptors (in hex): [ 64.264427] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 64.342314] 00 00 00 00 [ 64.381526] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 64.463259] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 64.547081] end_request: I/O error, dev sdb, sector 0 [ 64.607615] Buffer I/O error on device sdb, logical block 0 [ 64.674386] ata8: EH complete [ 64.710221] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 64.787322] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 64.861366] ata8.00: failed command: READ DMA [ 64.913570] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 64.913571] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 65.093906] ata8.00: status: { DRDY ERR } [ 65.141941] ata8.00: error: { ABRT } [ 65.196243] ata8.00: configured for UDMA/100 [ 65.247399] ata8: EH complete [ 65.283237] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 65.360332] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 65.434375] ata8.00: failed command: READ DMA [ 65.486582] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 65.486583] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 65.666919] ata8.00: status: { DRDY ERR } [ 65.714953] ata8.00: error: { ABRT } [ 65.769245] ata8.00: configured for UDMA/100 [ 65.820408] ata8: EH complete [ 65.856245] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 65.933346] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 66.007390] ata8.00: failed command: READ DMA [ 66.059597] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 66.059598] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 66.239930] ata8.00: status: { DRDY ERR } [ 66.287964] ata8.00: error: { ABRT } [ 66.342263] ata8.00: configured for UDMA/100 [ 66.393419] ata8: EH complete [ 66.429257] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 66.506356] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 66.580399] ata8.00: failed command: READ DMA [ 66.632607] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 66.632608] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 66.812943] ata8.00: status: { DRDY ERR } [ 66.860976] ata8.00: error: { ABRT } [ 66.915273] ata8.00: configured for UDMA/100 [ 66.966431] ata8: EH complete [ 67.002268] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 67.079369] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 67.153413] ata8.00: failed command: READ DMA [ 67.205617] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 67.205618] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 67.385952] ata8.00: status: { DRDY ERR } [ 67.433989] ata8.00: error: { ABRT } [ 67.488280] ata8.00: configured for UDMA/100 [ 67.539443] ata8: EH complete [ 67.575280] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 67.652380] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 67.726425] ata8.00: failed command: READ DMA [ 67.778630] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 67.778631] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 67.958966] ata8.00: status: { DRDY ERR } [ 68.007001] ata8.00: error: { ABRT } [ 68.061296] ata8.00: configured for UDMA/100 [ 68.112455] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 68.198142] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 68.290587] Descriptor sense data with sense descriptors (in hex): [ 68.364842] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 68.442728] 00 00 00 00 [ 68.481941] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 68.563674] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 68.647495] end_request: I/O error, dev sdb, sector 0 [ 68.708029] Buffer I/O error on device sdb, logical block 0 [ 68.774800] ata8: EH complete [ 68.810641] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 68.887736] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 68.961779] ata8.00: failed command: READ DMA [ 69.013987] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 69.013988] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 69.194322] ata8.00: status: { DRDY ERR } [ 69.242356] ata8.00: error: { ABRT } [ 69.296648] ata8.00: configured for UDMA/100 [ 69.347810] ata8: EH complete [ 69.383649] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 69.460748] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 69.534792] ata8.00: failed command: READ DMA [ 69.586997] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 69.586998] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 69.767332] ata8.00: status: { DRDY ERR } [ 69.815368] ata8.00: error: { ABRT } [ 69.869662] ata8.00: configured for UDMA/100 [ 69.920822] ata8: EH complete [ 69.956662] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 70.033761] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 70.107804] ata8.00: failed command: READ DMA [ 70.160009] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 70.160010] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 70.340344] ata8.00: status: { DRDY ERR } [ 70.388378] ata8.00: error: { ABRT } [ 70.442675] ata8.00: configured for UDMA/100 [ 70.493833] ata8: EH complete [ 70.529672] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 70.606772] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 70.680814] ata8.00: failed command: READ DMA [ 70.733021] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 70.733022] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 70.913358] ata8.00: status: { DRDY ERR } [ 70.961391] ata8.00: error: { ABRT } [ 71.015687] ata8.00: configured for UDMA/100 [ 71.066846] ata8: EH complete [ 71.102684] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 71.179784] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 71.253827] ata8.00: failed command: READ DMA [ 71.306032] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 71.306033] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 71.486367] ata8.00: status: { DRDY ERR } [ 71.534401] ata8.00: error: { ABRT } [ 71.588697] ata8.00: configured for UDMA/100 [ 71.639856] ata8: EH complete [ 71.675697] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 71.752795] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 71.826839] ata8.00: failed command: READ DMA [ 71.879045] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 71.879046] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 72.059382] ata8.00: status: { DRDY ERR } [ 72.107415] ata8.00: error: { ABRT } [ 72.161710] ata8.00: configured for UDMA/100 [ 72.212870] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 72.298557] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 72.387774] Descriptor sense data with sense descriptors (in hex): [ 72.462032] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 72.539919] 00 00 00 00 [ 72.579124] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 72.660769] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 72.744477] end_request: I/O error, dev sdb, sector 0 [ 72.805014] Buffer I/O error on device sdb, logical block 0 [ 72.871782] ata8: EH complete [ 72.907622] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 72.984718] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 73.058762] ata8.00: failed command: READ DMA [ 73.110967] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 73.110968] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 73.291303] ata8.00: status: { DRDY ERR } [ 73.339337] ata8.00: error: { ABRT } [ 73.393631] ata8.00: configured for UDMA/100 [ 73.444792] ata8: EH complete [ 73.480631] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 73.557730] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 73.631774] ata8.00: failed command: READ DMA [ 73.683979] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 73.683980] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 73.864316] ata8.00: status: { DRDY ERR } [ 73.912351] ata8.00: error: { ABRT } [ 73.966645] ata8.00: configured for UDMA/100 [ 74.017806] ata8: EH complete [ 74.053645] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 74.130743] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 74.204787] ata8.00: failed command: READ DMA [ 74.256992] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 74.256993] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 74.437327] ata8.00: status: { DRDY ERR } [ 74.485362] ata8.00: error: { ABRT } [ 74.539659] ata8.00: configured for UDMA/100 [ 74.590815] ata8: EH complete [ 74.626654] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 74.703754] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 74.777797] ata8.00: failed command: READ DMA [ 74.830004] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 74.830005] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 75.010340] ata8.00: status: { DRDY ERR } [ 75.058375] ata8.00: error: { ABRT } [ 75.112668] ata8.00: configured for UDMA/100 [ 75.163828] ata8: EH complete [ 75.199668] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 75.276767] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 75.350810] ata8.00: failed command: READ DMA [ 75.403015] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 75.403016] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 75.583350] ata8.00: status: { DRDY ERR } [ 75.631384] ata8.00: error: { ABRT } [ 75.685678] ata8.00: configured for UDMA/100 [ 75.736839] ata8: EH complete [ 75.772680] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 75.849778] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 75.923821] ata8.00: failed command: READ DMA [ 75.976029] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 75.976030] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 76.156364] ata8.00: status: { DRDY ERR } [ 76.204396] ata8.00: error: { ABRT } [ 76.258692] ata8.00: configured for UDMA/100 [ 76.309851] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 76.395539] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 76.484763] Descriptor sense data with sense descriptors (in hex): [ 76.559009] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 76.636908] 00 00 00 00 [ 76.676107] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 76.757855] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 76.841675] end_request: I/O error, dev sdb, sector 0 [ 76.902203] Buffer I/O error on device sdb, logical block 0 [ 76.968973] ldm_validate_partition_table(): Disk read failed. [ 76.968976] ata8: EH complete [ 77.073666] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 77.150755] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 77.224799] ata8.00: failed command: READ DMA [ 77.277004] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 77.277005] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 77.457339] ata8.00: status: { DRDY ERR } [ 77.505373] ata8.00: error: { ABRT } [ 77.559668] ata8.00: configured for UDMA/100 [ 77.610829] ata8: EH complete [ 77.646668] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 77.723765] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 77.797811] ata8.00: failed command: READ DMA [ 77.850017] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 77.850019] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 78.030351] ata8.00: status: { DRDY ERR } [ 78.081606] ata8.00: error: { ABRT } [ 78.135901] ata8.00: configured for UDMA/100 [ 78.187062] ata8: EH complete [ 78.222904] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 78.300001] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 78.374047] ata8.00: failed command: READ DMA [ 78.426252] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 78.426253] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 78.606586] ata8.00: status: { DRDY ERR } [ 78.654621] ata8.00: error: { ABRT } [ 78.708916] ata8.00: configured for UDMA/100 [ 78.760075] ata8: EH complete [ 78.795915] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 78.873012] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 78.947057] ata8.00: failed command: READ DMA [ 78.999264] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 78.999265] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 79.179597] ata8.00: status: { DRDY ERR } [ 79.227634] ata8.00: error: { ABRT } [ 79.281928] ata8.00: configured for UDMA/100 [ 79.333086] ata8: EH complete [ 79.368926] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 79.446025] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 79.520069] ata8.00: failed command: READ DMA [ 79.572275] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 79.572276] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 79.752608] ata8.00: status: { DRDY ERR } [ 79.800645] ata8.00: error: { ABRT } [ 79.854942] ata8.00: configured for UDMA/100 [ 79.906099] ata8: EH complete [ 79.941939] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 80.019037] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 80.093081] ata8.00: failed command: READ DMA [ 80.145286] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 80.145287] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 80.325620] ata8.00: status: { DRDY ERR } [ 80.373657] ata8.00: error: { ABRT } [ 80.427950] ata8.00: configured for UDMA/100 [ 80.479111] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 80.564798] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 80.654126] Descriptor sense data with sense descriptors (in hex): [ 80.728373] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 80.806377] 00 00 00 00 [ 80.845581] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 80.927211] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 81.010926] end_request: I/O error, dev sdb, sector 0 [ 81.071464] Buffer I/O error on device sdb, logical block 0 [ 81.138232] ata8: EH complete [ 81.174072] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 81.251169] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 81.325213] ata8.00: failed command: READ DMA [ 81.377418] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 81.377419] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 81.557752] ata8.00: status: { DRDY ERR } [ 81.605789] ata8.00: error: { ABRT } [ 81.660083] ata8.00: configured for UDMA/100 [ 81.711243] ata8: EH complete [ 81.747083] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 81.824182] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 81.898225] ata8.00: failed command: READ DMA [ 81.950429] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 81.950431] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 82.130766] ata8.00: status: { DRDY ERR } [ 82.178800] ata8.00: error: { ABRT } [ 82.233096] ata8.00: configured for UDMA/100 [ 82.284255] ata8: EH complete [ 82.320096] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 82.397193] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 82.471236] ata8.00: failed command: READ DMA [ 82.523441] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 82.523442] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 82.703776] ata8.00: status: { DRDY ERR } [ 82.751812] ata8.00: error: { ABRT } [ 82.806105] ata8.00: configured for UDMA/100 [ 82.857268] ata8: EH complete [ 82.893106] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 82.970204] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 83.044249] ata8.00: failed command: READ DMA [ 83.096454] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 83.096455] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 83.276789] ata8.00: status: { DRDY ERR } [ 83.324823] ata8.00: error: { ABRT } [ 83.379116] ata8.00: configured for UDMA/100 [ 83.430277] ata8: EH complete [ 83.466117] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 83.543218] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 83.617260] ata8.00: failed command: READ DMA [ 83.669466] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 83.669467] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 83.849801] ata8.00: status: { DRDY ERR } [ 83.897835] ata8.00: error: { ABRT } [ 83.952129] ata8.00: configured for UDMA/100 [ 84.003291] ata8: EH complete [ 84.039131] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 84.116229] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 84.190272] ata8.00: failed command: READ DMA [ 84.242477] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 84.242478] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 84.422812] ata8.00: status: { DRDY ERR } [ 84.470848] ata8.00: error: { ABRT } [ 84.525141] ata8.00: configured for UDMA/100 [ 84.576302] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 84.661989] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 84.751208] Descriptor sense data with sense descriptors (in hex): [ 84.825466] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 84.903352] 00 00 00 00 [ 84.942565] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 85.024297] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 85.108119] end_request: I/O error, dev sdb, sector 0 [ 85.168654] Buffer I/O error on device sdb, logical block 0 [ 85.235424] ata8: EH complete [ 85.271262] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 85.348359] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 85.422402] ata8.00: failed command: READ DMA [ 85.474609] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 85.474611] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 85.654945] ata8.00: status: { DRDY ERR } [ 85.702979] ata8.00: error: { ABRT } [ 85.757272] ata8.00: configured for UDMA/100 [ 85.808434] ata8: EH complete [ 85.844276] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 85.921373] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 85.995416] ata8.00: failed command: READ DMA [ 86.047622] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 86.047623] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 86.227955] ata8.00: status: { DRDY ERR } [ 86.275990] ata8.00: error: { ABRT } [ 86.330286] ata8.00: configured for UDMA/100 [ 86.381445] ata8: EH complete [ 86.417286] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 86.494384] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 86.568427] ata8.00: failed command: READ DMA [ 86.620632] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 86.620633] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 86.800968] ata8.00: status: { DRDY ERR } [ 86.849003] ata8.00: error: { ABRT } [ 86.903297] ata8.00: configured for UDMA/100 [ 86.954458] ata8: EH complete [ 86.990298] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 87.067396] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 87.141439] ata8.00: failed command: READ DMA [ 87.193644] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 87.193645] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 87.373979] ata8.00: status: { DRDY ERR } [ 87.422014] ata8.00: error: { ABRT } [ 87.476307] ata8.00: configured for UDMA/100 [ 87.527470] ata8: EH complete [ 87.563308] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 87.640406] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 87.714450] ata8.00: failed command: READ DMA [ 87.769879] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 87.769880] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 87.950218] ata8.00: status: { DRDY ERR } [ 87.998250] ata8.00: error: { ABRT } [ 88.052544] ata8.00: configured for UDMA/100 [ 88.103704] ata8: EH complete [ 88.139544] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 88.216644] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 88.290687] ata8.00: failed command: READ DMA [ 88.342892] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 88.342893] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 88.523227] ata8.00: status: { DRDY ERR } [ 88.571261] ata8.00: error: { ABRT } [ 88.625559] ata8.00: configured for UDMA/100 [ 88.676717] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 88.762404] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 88.851727] Descriptor sense data with sense descriptors (in hex): [ 88.925984] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 89.003870] 00 00 00 00 [ 89.043180] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 89.124927] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 89.208748] end_request: I/O error, dev sdb, sector 0 [ 89.269278] Buffer I/O error on device sdb, logical block 0 [ 89.336047] ata8: EH complete [ 89.371884] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 89.448981] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 89.523027] ata8.00: failed command: READ DMA [ 89.575232] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 89.575233] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 89.755567] ata8.00: status: { DRDY ERR } [ 89.803601] ata8.00: error: { ABRT } [ 89.857899] ata8.00: configured for UDMA/100 [ 89.909056] ata8: EH complete [ 89.944896] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 90.021995] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 90.096037] ata8.00: failed command: READ DMA [ 90.148244] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 90.148245] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 90.328579] ata8.00: status: { DRDY ERR } [ 90.376612] ata8.00: error: { ABRT } [ 90.430909] ata8.00: configured for UDMA/100 [ 90.482067] ata8: EH complete [ 90.517907] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 90.595007] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 90.669049] ata8.00: failed command: READ DMA [ 90.721256] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 90.721257] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 90.901593] ata8.00: status: { DRDY ERR } [ 90.949625] ata8.00: error: { ABRT } [ 91.003922] ata8.00: configured for UDMA/100 [ 91.055080] ata8: EH complete [ 91.090919] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 91.168019] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 91.242060] ata8.00: failed command: READ DMA [ 91.294267] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 91.294268] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 91.474602] ata8.00: status: { DRDY ERR } [ 91.522636] ata8.00: error: { ABRT } [ 91.576931] ata8.00: configured for UDMA/100 [ 91.628092] ata8: EH complete [ 91.663932] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 91.741029] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 91.815075] ata8.00: failed command: READ DMA [ 91.867279] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 91.867280] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 92.047615] ata8.00: status: { DRDY ERR } [ 92.095650] ata8.00: error: { ABRT } [ 92.149939] ata8.00: configured for UDMA/100 [ 92.201106] ata8: EH complete [ 92.236947] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 92.314041] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 92.388084] ata8.00: failed command: READ DMA [ 92.440292] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 92.440293] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 92.620628] ata8.00: status: { DRDY ERR } [ 92.668661] ata8.00: error: { ABRT } [ 92.722950] ata8.00: configured for UDMA/100 [ 92.774116] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 92.859805] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 92.949131] Descriptor sense data with sense descriptors (in hex): [ 93.023377] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 93.101276] 00 00 00 00 [ 93.140483] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 93.222119] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 93.305937] end_request: I/O error, dev sdb, sector 0 [ 93.366467] Buffer I/O error on device sdb, logical block 0 [ 93.433237] ata8: EH complete [ 93.436506] Dev sdb: unable to read RDB block 0 [ 93.523363] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 93.600458] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 93.674501] ata8.00: failed command: READ DMA [ 93.726710] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 93.726711] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 93.907042] ata8.00: status: { DRDY ERR } [ 93.955076] ata8.00: error: { ABRT } [ 94.009365] ata8.00: configured for UDMA/100 [ 94.060535] ata8: EH complete [ 94.096370] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 94.173469] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 94.247514] ata8.00: failed command: READ DMA [ 94.299720] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 94.299721] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 94.480054] ata8.00: status: { DRDY ERR } [ 94.528090] ata8.00: error: { ABRT } [ 94.582375] ata8.00: configured for UDMA/100 [ 94.633545] ata8: EH complete [ 94.669382] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 94.746482] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 94.820526] ata8.00: failed command: READ DMA [ 94.872733] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 94.872734] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 95.053065] ata8.00: status: { DRDY ERR } [ 95.101102] ata8.00: error: { ABRT } [ 95.155397] ata8.00: configured for UDMA/100 [ 95.206559] ata8: EH complete [ 95.242400] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 95.319492] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 95.393536] ata8.00: failed command: READ DMA [ 95.445744] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 95.445745] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 95.626078] ata8.00: status: { DRDY ERR } [ 95.674113] ata8.00: error: { ABRT } [ 95.728408] ata8.00: configured for UDMA/100 [ 95.779568] ata8: EH complete [ 95.815408] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 95.892507] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 95.966549] ata8.00: failed command: READ DMA [ 96.018758] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 96.018759] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 96.199090] ata8.00: status: { DRDY ERR } [ 96.247125] ata8.00: error: { ABRT } [ 96.301418] ata8.00: configured for UDMA/100 [ 96.352579] ata8: EH complete [ 96.388420] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 96.465517] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 96.539561] ata8.00: failed command: READ DMA [ 96.591768] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 96.591769] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 96.772103] ata8.00: status: { DRDY ERR } [ 96.820138] ata8.00: error: { ABRT } [ 96.874433] ata8.00: configured for UDMA/100 [ 96.925592] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 97.011279] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 97.100608] Descriptor sense data with sense descriptors (in hex): [ 97.174853] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 97.252752] 00 00 00 00 [ 97.291951] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 97.373593] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 97.457310] end_request: I/O error, dev sdb, sector 0 [ 97.521061] Buffer I/O error on device sdb, logical block 0 [ 97.587833] ata8: EH complete [ 97.623672] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 97.700769] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 97.774813] ata8.00: failed command: READ DMA [ 97.827021] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 97.827022] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 98.007354] ata8.00: status: { DRDY ERR } [ 98.055390] ata8.00: error: { ABRT } [ 98.109681] ata8.00: configured for UDMA/100 [ 98.160843] ata8: EH complete [ 98.196683] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 98.273781] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 98.347824] ata8.00: failed command: READ DMA [ 98.400031] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 98.400032] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 98.580366] ata8.00: status: { DRDY ERR } [ 98.628399] ata8.00: error: { ABRT } [ 98.682698] ata8.00: configured for UDMA/100 [ 98.733854] ata8: EH complete [ 98.769694] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 98.846793] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 98.920836] ata8.00: failed command: READ DMA [ 98.973043] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 98.973044] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 99.153379] ata8.00: status: { DRDY ERR } [ 99.201411] ata8.00: error: { ABRT } [ 99.255706] ata8.00: configured for UDMA/100 [ 99.306867] ata8: EH complete [ 99.342707] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 99.419805] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 99.493848] ata8.00: failed command: READ DMA [ 99.546055] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 99.546056] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 99.726390] ata8.00: status: { DRDY ERR } [ 99.774424] ata8.00: error: { ABRT } [ 99.828720] ata8.00: configured for UDMA/100 [ 99.879878] ata8: EH complete [ 99.915719] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 99.992816] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 100.066861] ata8.00: failed command: READ DMA [ 100.119066] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 100.119067] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 100.299401] ata8.00: status: { DRDY ERR } [ 100.347436] ata8.00: error: { ABRT } [ 100.401727] ata8.00: configured for UDMA/100 [ 100.452889] ata8: EH complete [ 100.488728] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 100.565827] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 100.639871] ata8.00: failed command: READ DMA [ 100.692078] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 100.692079] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 100.872414] ata8.00: status: { DRDY ERR } [ 100.920448] ata8.00: error: { ABRT } [ 100.974739] ata8.00: configured for UDMA/100 [ 101.025903] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 101.111590] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 101.200813] Descriptor sense data with sense descriptors (in hex): [ 101.275059] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 101.352957] 00 00 00 00 [ 101.392159] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 101.473905] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 101.557620] end_request: I/O error, dev sdb, sector 0 [ 101.618150] Buffer I/O error on device sdb, logical block 0 [ 101.684921] ata8: EH complete [ 101.720758] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 101.797855] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 101.871900] ata8.00: failed command: READ DMA [ 101.924107] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 101.924108] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 102.104441] ata8.00: status: { DRDY ERR } [ 102.152476] ata8.00: error: { ABRT } [ 102.206774] ata8.00: configured for UDMA/100 [ 102.257930] ata8: EH complete [ 102.293768] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 102.370868] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 102.444911] ata8.00: failed command: READ DMA [ 102.497118] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 102.497120] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 102.677452] ata8.00: status: { DRDY ERR } [ 102.725488] ata8.00: error: { ABRT } [ 102.779779] ata8.00: configured for UDMA/100 [ 102.830940] ata8: EH complete [ 102.866781] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 102.943880] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 103.017924] ata8.00: failed command: READ DMA [ 103.070129] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 103.070130] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 103.250463] ata8.00: status: { DRDY ERR } [ 103.298498] ata8.00: error: { ABRT } [ 103.352793] ata8.00: configured for UDMA/100 [ 103.403954] ata8: EH complete [ 103.439793] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 103.516891] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 103.590936] ata8.00: failed command: READ DMA [ 103.643141] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 103.643142] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 103.823477] ata8.00: status: { DRDY ERR } [ 103.871511] ata8.00: error: { ABRT } [ 103.925808] ata8.00: configured for UDMA/100 [ 103.976966] ata8: EH complete [ 104.012807] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 104.089904] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 104.163948] ata8.00: failed command: READ DMA [ 104.216153] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 104.216154] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 104.396488] ata8.00: status: { DRDY ERR } [ 104.444522] ata8.00: error: { ABRT } [ 104.498817] ata8.00: configured for UDMA/100 [ 104.549976] ata8: EH complete [ 104.585815] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 104.662914] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 104.736958] ata8.00: failed command: READ DMA [ 104.789165] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 104.789166] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 104.969500] ata8.00: status: { DRDY ERR } [ 105.017536] ata8.00: error: { ABRT } [ 105.071827] ata8.00: configured for UDMA/100 [ 105.122988] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 105.208677] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 105.297902] Descriptor sense data with sense descriptors (in hex): [ 105.372147] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 105.450045] 00 00 00 18 [ 105.489250] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 105.570985] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00 [ 105.654806] end_request: I/O error, dev sdb, sector 24 [ 105.716381] Buffer I/O error on device sdb, logical block 3 [ 105.783150] ata8: EH complete [ 105.818990] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 105.896086] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 105.970129] ata8.00: failed command: READ DMA [ 106.022338] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 106.022339] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 106.202672] ata8.00: status: { DRDY ERR } [ 106.250706] ata8.00: error: { ABRT } [ 106.304996] ata8.00: configured for UDMA/100 [ 106.356160] ata8: EH complete [ 106.392000] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 106.469100] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 106.543143] ata8.00: failed command: READ DMA [ 106.595347] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 106.595349] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 106.775682] ata8.00: status: { DRDY ERR } [ 106.823718] ata8.00: error: { ABRT } [ 106.878011] ata8.00: configured for UDMA/100 [ 106.929172] ata8: EH complete [ 106.965013] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 107.042112] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 107.116153] ata8.00: failed command: READ DMA [ 107.168360] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 107.168361] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 107.351918] ata8.00: status: { DRDY ERR } [ 107.399954] ata8.00: error: { ABRT } [ 107.454251] ata8.00: configured for UDMA/100 [ 107.505408] ata8: EH complete [ 107.541247] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 107.618347] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 107.692390] ata8.00: failed command: READ DMA [ 107.744595] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 107.744597] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 107.924932] ata8.00: status: { DRDY ERR } [ 107.972966] ata8.00: error: { ABRT } [ 108.027261] ata8.00: configured for UDMA/100 [ 108.078419] ata8: EH complete [ 108.114260] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 108.191357] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 108.265401] ata8.00: failed command: READ DMA [ 108.317608] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 108.317610] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 108.497943] ata8.00: status: { DRDY ERR } [ 108.545977] ata8.00: error: { ABRT } [ 108.600270] ata8.00: configured for UDMA/100 [ 108.651433] ata8: EH complete [ 108.687270] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 108.764370] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 108.838415] ata8.00: failed command: READ DMA [ 108.890620] ata8.00: cmd c8/00:08:18:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 108.890621] res 51/04:08:18:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 109.070956] ata8.00: status: { DRDY ERR } [ 109.118989] ata8.00: error: { ABRT } [ 109.173277] ata8.00: configured for UDMA/100 [ 109.224445] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 109.310132] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 109.399245] Descriptor sense data with sense descriptors (in hex): [ 109.473503] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 109.551388] 00 00 00 18 [ 109.590597] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 109.672237] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 18 00 00 08 00 [ 109.755947] end_request: I/O error, dev sdb, sector 24 [ 109.817525] Buffer I/O error on device sdb, logical block 3 [ 109.884292] ata8: EH complete [ 109.920132] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 109.997229] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 110.071273] ata8.00: failed command: READ DMA [ 110.123480] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 110.123481] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 110.303812] ata8.00: status: { DRDY ERR } [ 110.351849] ata8.00: error: { ABRT } [ 110.406141] ata8.00: configured for UDMA/100 [ 110.457303] ata8: EH complete [ 110.493143] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 110.570243] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 110.644284] ata8.00: failed command: READ DMA [ 110.696492] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 110.696493] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 110.876826] ata8.00: status: { DRDY ERR } [ 110.924860] ata8.00: error: { ABRT } [ 110.979150] ata8.00: configured for UDMA/100 [ 111.030318] ata8: EH complete [ 111.066152] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 111.143252] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 111.217297] ata8.00: failed command: READ DMA [ 111.269504] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 111.269505] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 111.449838] ata8.00: status: { DRDY ERR } [ 111.497872] ata8.00: error: { ABRT } [ 111.552160] ata8.00: configured for UDMA/100 [ 111.603328] ata8: EH complete [ 111.639164] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 111.716264] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 111.790308] ata8.00: failed command: READ DMA [ 111.842515] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 111.842516] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 112.022850] ata8.00: status: { DRDY ERR } [ 112.070884] ata8.00: error: { ABRT } [ 112.125182] ata8.00: configured for UDMA/100 [ 112.176341] ata8: EH complete [ 112.212182] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 112.289277] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 112.363320] ata8.00: failed command: READ DMA [ 112.415525] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 112.415527] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 112.595861] ata8.00: status: { DRDY ERR } [ 112.643895] ata8.00: error: { ABRT } [ 112.698191] ata8.00: configured for UDMA/100 [ 112.749351] ata8: EH complete [ 112.785192] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 112.862291] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 112.936334] ata8.00: failed command: READ DMA [ 112.988538] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 112.988539] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 113.168875] ata8.00: status: { DRDY ERR } [ 113.216909] ata8.00: error: { ABRT } [ 113.271195] ata8.00: configured for UDMA/100 [ 113.322364] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 113.408052] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 113.497377] Descriptor sense data with sense descriptors (in hex): [ 113.571624] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 113.649522] 00 00 00 00 [ 113.688730] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 113.770462] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 113.854283] end_request: I/O error, dev sdb, sector 0 [ 113.914821] Buffer I/O error on device sdb, logical block 0 [ 113.981587] unable to read partition table [ 113.981589] ata8: EH complete [ 114.067897] sd 8:0:0:0: [sdb] Attached SCSI disk [ 114.135025] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 114.212185] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 114.286216] ata8.00: failed command: READ DMA [ 114.338418] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 114.338419] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 114.519778] ata8.00: status: { DRDY ERR } [ 114.567813] ata8.00: error: { ABRT } [ 114.622118] ata8.00: configured for UDMA/100 [ 114.673261] ata8: EH complete [ 114.709097] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 114.786199] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 114.860241] ata8.00: failed command: READ DMA [ 114.912448] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 114.912449] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 115.093822] ata8.00: status: { DRDY ERR } [ 115.141856] ata8.00: error: { ABRT } [ 115.196223] ata8.00: configured for UDMA/100 [ 115.247329] ata8: EH complete [ 115.283158] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 115.360250] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 115.434290] ata8.00: failed command: READ DMA [ 115.486497] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 115.486499] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 115.667872] ata8.00: status: { DRDY ERR } [ 115.715905] ata8.00: error: { ABRT } [ 115.770197] ata8.00: configured for UDMA/100 [ 115.821364] ata8: EH complete [ 115.857202] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 115.934298] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 116.008342] ata8.00: failed command: READ DMA [ 116.060548] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 116.060550] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 116.241922] ata8.00: status: { DRDY ERR } [ 116.289957] ata8.00: error: { ABRT } [ 116.344246] ata8.00: configured for UDMA/100 [ 116.395414] ata8: EH complete [ 116.431251] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 116.508350] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 116.582395] ata8.00: failed command: READ DMA [ 116.634601] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 116.634602] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 116.815974] ata8.00: status: { DRDY ERR } [ 116.867232] ata8.00: error: { ABRT } [ 116.921529] ata8.00: configured for UDMA/100 [ 116.972687] ata8: EH complete [ 117.008526] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 117.085625] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 117.159669] ata8.00: failed command: READ DMA [ 117.211877] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 117.211878] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 117.393249] ata8.00: status: { DRDY ERR } [ 117.441286] ata8.00: error: { ABRT } [ 117.495575] ata8.00: configured for UDMA/100 [ 117.546741] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 117.632426] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 117.721650] Descriptor sense data with sense descriptors (in hex): [ 117.795897] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 117.873898] 00 00 00 00 [ 117.913106] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 117.994839] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00 [ 118.078659] end_request: I/O error, dev sdb, sector 0 [ 118.139197] Buffer I/O error on device sdb, logical block 0 [ 118.205962] Buffer I/O error on device sdb, logical block 1 [ 118.272725] Buffer I/O error on device sdb, logical block 2 [ 118.339492] Buffer I/O error on device sdb, logical block 3 [ 118.406260] ata8: EH complete [ 118.442100] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 118.519197] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 118.593238] ata8.00: failed command: READ DMA [ 118.645445] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 118.645447] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 118.825778] ata8.00: status: { DRDY ERR } [ 118.873815] ata8.00: error: { ABRT } [ 118.928108] ata8.00: configured for UDMA/100 [ 118.979270] ata8: EH complete [ 119.015108] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 119.092207] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 119.166252] ata8.00: failed command: READ DMA [ 119.218456] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 119.218457] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 119.398791] ata8.00: status: { DRDY ERR } [ 119.446828] ata8.00: error: { ABRT } [ 119.501121] ata8.00: configured for UDMA/100 [ 119.552284] ata8: EH complete [ 119.588120] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 119.665219] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 119.739263] ata8.00: failed command: READ DMA [ 119.791468] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 119.791469] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 119.971806] ata8.00: status: { DRDY ERR } [ 120.019839] ata8.00: error: { ABRT } [ 120.074126] ata8.00: configured for UDMA/100 [ 120.125293] ata8: EH complete [ 120.161131] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 120.238230] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 120.312274] ata8.00: failed command: READ DMA [ 120.364481] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 120.364482] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 120.544816] ata8.00: status: { DRDY ERR } [ 120.592850] ata8.00: error: { ABRT } [ 120.647136] ata8.00: configured for UDMA/100 [ 120.698303] ata8: EH complete [ 120.734143] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 120.811242] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 120.885288] ata8.00: failed command: READ DMA [ 120.937493] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 120.937494] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 121.117826] ata8.00: status: { DRDY ERR } [ 121.165862] ata8.00: error: { ABRT } [ 121.220161] ata8.00: configured for UDMA/100 [ 121.271319] ata8: EH complete [ 121.307158] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 121.384255] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 121.458297] ata8.00: failed command: READ DMA [ 121.510504] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 121.510505] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 121.690839] ata8.00: status: { DRDY ERR } [ 121.738874] ata8.00: error: { ABRT } [ 121.793170] ata8.00: configured for UDMA/100 [ 121.844329] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 121.930017] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 122.019336] Descriptor sense data with sense descriptors (in hex): [ 122.093596] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 122.171483] 00 00 00 00 [ 122.210687] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 122.292428] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 122.376248] end_request: I/O error, dev sdb, sector 0 [ 122.436783] Buffer I/O error on device sdb, logical block 0 [ 122.503554] ata8: EH complete [ 122.626883] md: linear personality registered for level -1 [ 122.698757] md: multipath personality registered for level -4 [ 122.783875] md: raid0 personality registered for level 0 [ 122.865336] md: raid1 personality registered for level 1 [ 122.944241] async_tx: api initialized (async) [ 123.011441] xor: automatically using best checksumming function: generic_sse [ 123.128004] generic_sse: 7833.000 MB/sec [ 123.196390] xor: using function: generic_sse (7833.000 MB/sec) [ 123.352026] raid6: int64x1 1793 MB/s [ 123.472013] raid6: int64x2 2438 MB/s [ 123.584011] raid6: int64x4 1898 MB/s [ 123.696038] raid6: int64x8 1607 MB/s [ 123.808005] raid6: sse2x1 3895 MB/s [ 123.920005] raid6: sse2x2 4518 MB/s [ 124.032013] raid6: sse2x4 6454 MB/s [ 124.076888] raid6: using algorithm sse2x4 (6454 MB/s) [ 124.142530] md: raid6 personality registered for level 6 [ 124.206170] md: raid5 personality registered for level 5 [ 124.269801] md: raid4 personality registered for level 4 [ 124.353804] md: raid10 personality registered for level 10 [ 124.442646] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 124.526694] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 124.617270] ata8.00: failed command: READ DMA EXT [ 124.690171] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 124.690173] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 124.903577] ata8.00: status: { DRDY ERR } [ 124.968147] ata8.00: error: { ABRT } [ 125.038972] ata8.00: configured for UDMA/100 [ 125.095233] ata8: EH complete [ 125.141450] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 125.218547] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 125.292592] ata8.00: failed command: READ DMA EXT [ 125.348956] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 125.348957] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 125.529291] ata8.00: status: { DRDY ERR } [ 125.577326] ata8.00: error: { ABRT } [ 125.631615] ata8.00: configured for UDMA/100 [ 125.682781] ata8: EH complete [ 125.718620] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 125.795719] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 125.869765] ata8.00: failed command: READ DMA EXT [ 125.926127] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 125.926128] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 126.106462] ata8.00: status: { DRDY ERR } [ 126.154497] ata8.00: error: { ABRT } [ 126.208797] ata8.00: configured for UDMA/100 [ 126.259953] ata8: EH complete [ 126.295794] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 126.372888] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 126.446932] ata8.00: failed command: READ DMA EXT [ 126.503300] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 126.503301] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 126.683633] ata8.00: status: { DRDY ERR } [ 126.731668] ata8.00: error: { ABRT } [ 126.785967] ata8.00: configured for UDMA/100 [ 126.837126] ata8: EH complete [ 126.872962] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 126.950062] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 127.024105] ata8.00: failed command: READ DMA EXT [ 127.080471] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 127.080472] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 127.260806] ata8.00: status: { DRDY ERR } [ 127.308841] ata8.00: error: { ABRT } [ 127.363138] ata8.00: configured for UDMA/100 [ 127.414295] ata8: EH complete [ 127.450132] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 127.527234] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 127.604496] ata8.00: failed command: READ DMA EXT [ 127.660866] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 127.660867] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 127.841203] ata8.00: status: { DRDY ERR } [ 127.889235] ata8.00: error: { ABRT } [ 127.943534] ata8.00: configured for UDMA/100 [ 127.994694] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 128.080378] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 128.169602] Descriptor sense data with sense descriptors (in hex): [ 128.243848] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 128.321745] 74 70 6d 00 [ 128.360954] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 128.442692] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 128.526513] end_request: I/O error, dev sdb, sector 1953524992 [ 128.596403] Buffer I/O error on device sdb, logical block 244190624 [ 128.671494] ata8: EH complete [ 128.707333] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 128.784427] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 128.858472] ata8.00: failed command: READ DMA EXT [ 128.914837] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 128.914838] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 129.095173] ata8.00: status: { DRDY ERR } [ 129.143207] ata8.00: error: { ABRT } [ 129.197495] ata8.00: configured for UDMA/100 [ 129.248662] ata8: EH complete [ 129.284500] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 129.361599] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 129.435643] ata8.00: failed command: READ DMA EXT [ 129.492009] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 129.492010] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 129.672344] ata8.00: status: { DRDY ERR } [ 129.720378] ata8.00: error: { ABRT } [ 129.774667] ata8.00: configured for UDMA/100 [ 129.825833] ata8: EH complete [ 129.861671] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 129.938771] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 130.012815] ata8.00: failed command: READ DMA EXT [ 130.069181] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 130.069182] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 130.249514] ata8.00: status: { DRDY ERR } [ 130.297550] ata8.00: error: { ABRT } [ 130.351840] ata8.00: configured for UDMA/100 [ 130.403005] ata8: EH complete [ 130.438844] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 130.515945] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 130.589986] ata8.00: failed command: READ DMA EXT [ 130.646352] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 130.646353] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 130.826687] ata8.00: status: { DRDY ERR } [ 130.874722] ata8.00: error: { ABRT } [ 130.929013] ata8.00: configured for UDMA/100 [ 130.980175] ata8: EH complete [ 131.016016] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 131.093114] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 131.167157] ata8.00: failed command: READ DMA EXT [ 131.223523] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 131.223524] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 131.403858] ata8.00: status: { DRDY ERR } [ 131.451893] ata8.00: error: { ABRT } [ 131.506180] ata8.00: configured for UDMA/100 [ 131.557349] ata8: EH complete [ 131.593184] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 131.670287] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 131.744327] ata8.00: failed command: READ DMA EXT [ 131.800695] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 131.800696] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 131.981033] ata8.00: status: { DRDY ERR } [ 132.029065] ata8.00: error: { ABRT } [ 132.083351] ata8.00: configured for UDMA/100 [ 132.134519] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 132.220206] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 132.309430] Descriptor sense data with sense descriptors (in hex): [ 132.383675] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 132.461575] 74 70 6d 00 [ 132.500780] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 132.582514] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 132.666336] end_request: I/O error, dev sdb, sector 1953524992 [ 132.736232] Buffer I/O error on device sdb, logical block 244190624 [ 132.811322] ata8: EH complete [ 132.847194] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 132.924360] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 132.998405] ata8.00: failed command: READ DMA EXT [ 133.054769] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 133.054770] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 133.235104] ata8.00: status: { DRDY ERR } [ 133.283139] ata8.00: error: { ABRT } [ 133.337429] ata8.00: configured for UDMA/100 [ 133.388595] ata8: EH complete [ 133.424432] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 133.501532] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 133.575578] ata8.00: failed command: READ DMA EXT [ 133.631942] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 133.631943] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 133.812275] ata8.00: status: { DRDY ERR } [ 133.860311] ata8.00: error: { ABRT } [ 133.914602] ata8.00: configured for UDMA/100 [ 133.965767] ata8: EH complete [ 134.001603] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 134.078703] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 134.152747] ata8.00: failed command: READ DMA EXT [ 134.209112] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 134.209113] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 134.389447] ata8.00: status: { DRDY ERR } [ 134.437482] ata8.00: error: { ABRT } [ 134.491771] ata8.00: configured for UDMA/100 [ 134.542939] ata8: EH complete [ 134.578773] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 134.655876] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 134.729918] ata8.00: failed command: READ DMA EXT [ 134.786283] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 134.786284] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 134.966620] ata8.00: status: { DRDY ERR } [ 135.014655] ata8.00: error: { ABRT } [ 135.068943] ata8.00: configured for UDMA/100 [ 135.120109] ata8: EH complete [ 135.155945] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 135.233048] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 135.307090] ata8.00: failed command: READ DMA EXT [ 135.363455] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 135.363456] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 135.543792] ata8.00: status: { DRDY ERR } [ 135.591826] ata8.00: error: { ABRT } [ 135.646113] ata8.00: configured for UDMA/100 [ 135.697281] ata8: EH complete [ 135.733119] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 135.810218] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 135.884263] ata8.00: failed command: READ DMA EXT [ 135.940629] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 135.940630] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 136.120963] ata8.00: status: { DRDY ERR } [ 136.168998] ata8.00: error: { ABRT } [ 136.223296] ata8.00: configured for UDMA/100 [ 136.274452] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 136.360139] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 136.449468] Descriptor sense data with sense descriptors (in hex): [ 136.523713] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 136.601610] 74 70 6d a0 [ 136.640818] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 136.722453] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 136.806171] end_request: I/O error, dev sdb, sector 1953525152 [ 136.876062] Buffer I/O error on device sdb, logical block 244190644 [ 136.951148] ata8: EH complete [ 136.986990] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 137.064086] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 137.138129] ata8.00: failed command: READ DMA EXT [ 137.194494] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 137.194495] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 137.374829] ata8.00: status: { DRDY ERR } [ 137.422864] ata8.00: error: { ABRT } [ 137.480383] ata8.00: configured for UDMA/100 [ 137.531543] ata8: EH complete [ 137.567382] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 137.644481] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 137.718523] ata8.00: failed command: READ DMA EXT [ 137.774890] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 137.774892] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 137.955225] ata8.00: status: { DRDY ERR } [ 138.003262] ata8.00: error: { ABRT } [ 138.057560] ata8.00: configured for UDMA/100 [ 138.108715] ata8: EH complete [ 138.144552] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 138.221651] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 138.295697] ata8.00: failed command: READ DMA EXT [ 138.352062] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 138.352064] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 138.532395] ata8.00: status: { DRDY ERR } [ 138.580431] ata8.00: error: { ABRT } [ 138.634730] ata8.00: configured for UDMA/100 [ 138.685886] ata8: EH complete [ 138.721724] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 138.798823] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 138.872868] ata8.00: failed command: READ DMA EXT [ 138.929234] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 138.929235] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 139.109567] ata8.00: status: { DRDY ERR } [ 139.157602] ata8.00: error: { ABRT } [ 139.211891] ata8.00: configured for UDMA/100 [ 139.263058] ata8: EH complete [ 139.298895] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 139.375996] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 139.450039] ata8.00: failed command: READ DMA EXT [ 139.506405] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 139.506406] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 139.686739] ata8.00: status: { DRDY ERR } [ 139.734773] ata8.00: error: { ABRT } [ 139.789066] ata8.00: configured for UDMA/100 [ 139.840229] ata8: EH complete [ 139.876068] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 139.953168] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 140.027210] ata8.00: failed command: READ DMA EXT [ 140.083575] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 140.083576] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 140.263911] ata8.00: status: { DRDY ERR } [ 140.311945] ata8.00: error: { ABRT } [ 140.366233] ata8.00: configured for UDMA/100 [ 140.417401] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 140.503088] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 140.592310] Descriptor sense data with sense descriptors (in hex): [ 140.666558] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 140.744455] 74 70 6d a0 [ 140.783656] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 140.865402] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 140.949223] end_request: I/O error, dev sdb, sector 1953525152 [ 141.019114] Buffer I/O error on device sdb, logical block 244190644 [ 141.094202] ata8: EH complete [ 141.133827] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 141.210986] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 141.285028] ata8.00: failed command: READ DMA EXT [ 141.341396] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 141.341397] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 141.521731] ata8.00: status: { DRDY ERR } [ 141.569764] ata8.00: error: { ABRT } [ 141.624056] ata8.00: configured for UDMA/100 [ 141.675218] ata8: EH complete [ 141.711060] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 141.788158] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 141.862200] ata8.00: failed command: READ DMA EXT [ 141.918565] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 141.918567] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 142.098901] ata8.00: status: { DRDY ERR } [ 142.146936] ata8.00: error: { ABRT } [ 142.201222] ata8.00: configured for UDMA/100 [ 142.252391] ata8: EH complete [ 142.288229] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 142.365329] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 142.439372] ata8.00: failed command: READ DMA EXT [ 142.495737] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 142.495738] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 142.676073] ata8.00: status: { DRDY ERR } [ 142.724107] ata8.00: error: { ABRT } [ 142.778393] ata8.00: configured for UDMA/100 [ 142.829563] ata8: EH complete [ 142.865401] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 142.942501] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 143.016543] ata8.00: failed command: READ DMA EXT [ 143.072909] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 143.072910] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 143.253244] ata8.00: status: { DRDY ERR } [ 143.301278] ata8.00: error: { ABRT } [ 143.355566] ata8.00: configured for UDMA/100 [ 143.406733] ata8: EH complete [ 143.442574] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 143.519672] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 143.593716] ata8.00: failed command: READ DMA EXT [ 143.650081] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 143.650083] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 143.830418] ata8.00: status: { DRDY ERR } [ 143.878450] ata8.00: error: { ABRT } [ 143.932740] ata8.00: configured for UDMA/100 [ 143.983906] ata8: EH complete [ 144.019743] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 144.096843] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 144.170886] ata8.00: failed command: READ DMA EXT [ 144.227254] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 144.227255] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 144.407587] ata8.00: status: { DRDY ERR } [ 144.455622] ata8.00: error: { ABRT } [ 144.509913] ata8.00: configured for UDMA/100 [ 144.561077] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 144.646764] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 144.735981] Descriptor sense data with sense descriptors (in hex): [ 144.810240] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 144.888237] 74 70 6d 00 [ 144.927438] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 145.009184] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 145.092898] end_request: I/O error, dev sdb, sector 1953524992 [ 145.162790] Buffer I/O error on device sdb, logical block 244190624 [ 145.237880] ata8: EH complete [ 145.273721] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 145.350813] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 145.424856] ata8.00: failed command: READ DMA EXT [ 145.481223] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 145.481224] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 145.661559] ata8.00: status: { DRDY ERR } [ 145.709591] ata8.00: error: { ABRT } [ 145.763878] ata8.00: configured for UDMA/100 [ 145.815048] ata8: EH complete [ 145.850885] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 145.927985] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 146.002029] ata8.00: failed command: READ DMA EXT [ 146.058394] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 146.058396] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 146.238729] ata8.00: status: { DRDY ERR } [ 146.286763] ata8.00: error: { ABRT } [ 146.341053] ata8.00: configured for UDMA/100 [ 146.392220] ata8: EH complete [ 146.428057] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 146.505159] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 146.579200] ata8.00: failed command: READ DMA EXT [ 146.635566] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 146.635567] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 146.815900] ata8.00: status: { DRDY ERR } [ 146.863938] ata8.00: error: { ABRT } [ 146.918233] ata8.00: configured for UDMA/100 [ 146.969391] ata8: EH complete [ 147.005229] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 147.082329] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 147.156371] ata8.00: failed command: READ DMA EXT [ 147.212738] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 147.212740] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 147.396297] ata8.00: status: { DRDY ERR } [ 147.444331] ata8.00: error: { ABRT } [ 147.498621] ata8.00: configured for UDMA/100 [ 147.549788] ata8: EH complete [ 147.585626] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 147.662725] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 147.736768] ata8.00: failed command: READ DMA EXT [ 147.793134] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 147.793135] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 147.973470] ata8.00: status: { DRDY ERR } [ 148.021503] ata8.00: error: { ABRT } [ 148.075791] ata8.00: configured for UDMA/100 [ 148.126957] ata8: EH complete [ 148.162798] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 148.239897] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 148.313938] ata8.00: failed command: READ DMA EXT [ 148.370305] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 148.370306] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 148.550640] ata8.00: status: { DRDY ERR } [ 148.598674] ata8.00: error: { ABRT } [ 148.652962] ata8.00: configured for UDMA/100 [ 148.704128] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 148.789714] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 148.878826] Descriptor sense data with sense descriptors (in hex): [ 148.953085] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 149.030971] 74 70 6d 00 [ 149.070183] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 149.151917] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 149.235632] end_request: I/O error, dev sdb, sector 1953524992 [ 149.305529] Buffer I/O error on device sdb, logical block 244190624 [ 149.380620] ata8: EH complete [ 149.416566] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 149.493659] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 149.567703] ata8.00: failed command: READ DMA EXT [ 149.624069] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 149.624071] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 149.804403] ata8.00: status: { DRDY ERR } [ 149.852440] ata8.00: error: { ABRT } [ 149.906736] ata8.00: configured for UDMA/100 [ 149.957894] ata8: EH complete [ 149.993733] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 150.070833] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 150.144874] ata8.00: failed command: READ DMA EXT [ 150.201240] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 150.201241] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 150.381573] ata8.00: status: { DRDY ERR } [ 150.429610] ata8.00: error: { ABRT } [ 150.483909] ata8.00: configured for UDMA/100 [ 150.535064] ata8: EH complete [ 150.570902] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 150.648000] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 150.722045] ata8.00: failed command: READ DMA EXT [ 150.778411] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 150.778412] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 150.958746] ata8.00: status: { DRDY ERR } [ 151.006782] ata8.00: error: { ABRT } [ 151.061082] ata8.00: configured for UDMA/100 [ 151.112237] ata8: EH complete [ 151.148076] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 151.225172] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 151.299217] ata8.00: failed command: READ DMA EXT [ 151.355582] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 151.355584] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 151.535918] ata8.00: status: { DRDY ERR } [ 151.583954] ata8.00: error: { ABRT } [ 151.638251] ata8.00: configured for UDMA/100 [ 151.689407] ata8: EH complete [ 151.725249] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 151.802346] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 151.876390] ata8.00: failed command: READ DMA EXT [ 151.932754] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 151.932755] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 152.113090] ata8.00: status: { DRDY ERR } [ 152.161125] ata8.00: error: { ABRT } [ 152.215419] ata8.00: configured for UDMA/100 [ 152.266580] ata8: EH complete [ 152.302419] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 152.379515] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 152.453559] ata8.00: failed command: READ DMA EXT [ 152.509926] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 152.509927] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 152.690263] ata8.00: status: { DRDY ERR } [ 152.738295] ata8.00: error: { ABRT } [ 152.792582] ata8.00: configured for UDMA/100 [ 152.843751] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 152.929437] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 153.018655] Descriptor sense data with sense descriptors (in hex): [ 153.092915] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 153.170798] 74 70 6d a0 [ 153.210012] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 153.291641] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 153.375462] end_request: I/O error, dev sdb, sector 1953525152 [ 153.445359] Buffer I/O error on device sdb, logical block 244190644 [ 153.520450] ata8: EH complete [ 153.556289] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 153.633382] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 153.707426] ata8.00: failed command: READ DMA EXT [ 153.763791] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 153.763793] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 153.944127] ata8.00: status: { DRDY ERR } [ 153.992162] ata8.00: error: { ABRT } [ 154.046450] ata8.00: configured for UDMA/100 [ 154.097617] ata8: EH complete [ 154.133455] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 154.210555] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 154.284599] ata8.00: failed command: READ DMA EXT [ 154.340964] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 154.340965] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 154.521300] ata8.00: status: { DRDY ERR } [ 154.569333] ata8.00: error: { ABRT } [ 154.623623] ata8.00: configured for UDMA/100 [ 154.674790] ata8: EH complete [ 154.710628] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 154.787726] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 154.861771] ata8.00: failed command: READ DMA EXT [ 154.918137] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 154.918138] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 155.098471] ata8.00: status: { DRDY ERR } [ 155.146505] ata8.00: error: { ABRT } [ 155.200804] ata8.00: configured for UDMA/100 [ 155.251961] ata8: EH complete [ 155.287800] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 155.364899] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 155.438940] ata8.00: failed command: READ DMA EXT [ 155.495307] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 155.495309] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 155.675642] ata8.00: status: { DRDY ERR } [ 155.723677] ata8.00: error: { ABRT } [ 155.777972] ata8.00: configured for UDMA/100 [ 155.829133] ata8: EH complete [ 155.864972] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 155.942071] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 156.016114] ata8.00: failed command: READ DMA EXT [ 156.072479] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 156.072480] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 156.252814] ata8.00: status: { DRDY ERR } [ 156.300849] ata8.00: error: { ABRT } [ 156.355149] ata8.00: configured for UDMA/100 [ 156.406303] ata8: EH complete [ 156.442144] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 156.519242] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 156.593285] ata8.00: failed command: READ DMA EXT [ 156.649651] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 156.649652] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 156.829986] ata8.00: status: { DRDY ERR } [ 156.878020] ata8.00: error: { ABRT } [ 156.932317] ata8.00: configured for UDMA/100 [ 156.986698] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 157.072386] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 157.161610] Descriptor sense data with sense descriptors (in hex): [ 157.235855] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 157.313755] 74 70 6d a0 [ 157.352962] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 157.434701] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 157.518520] end_request: I/O error, dev sdb, sector 1953525152 [ 157.588410] Buffer I/O error on device sdb, logical block 244190644 [ 157.663502] ata8: EH complete [ 157.706453] sky2 eth0: enabling interface [ 157.764831] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 161.460095] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 161.547593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 172.468006] eth0: no IPv6 routers present [ 286.574035] device-mapper: uevent: version 1.0.3 [ 286.629471] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 289.756734] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal [ 289.857829] REISERFS (device dm-0): using ordered data mode [ 289.952859] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 290.140411] REISERFS (device dm-0): checking transaction log (dm-0) [ 290.276215] REISERFS (device dm-0): Using r5 hash to sort names [ 292.231184] udevd version 125 started [ 292.756946] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 292.861286] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 292.938429] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 293.012466] ata8.00: failed command: READ DMA [ 293.064670] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 293.064672] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 293.158382] processor LNXCPU:00: registered as cooling_device0 [ 293.315923] ata8.00: status: { DRDY ERR } [ 293.317274] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 293.327455] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 293.327492] ACPI: Power Button [PWRB] [ 293.441736] ACPI: SSDT 00000000cfee81c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 293.668775] Error: Driver 'pcspkr' is already registered, aborting... [ 293.771627] ata8.00: error: { ABRT } [ 293.814531] processor LNXCPU:01: registered as cooling_device1 [ 293.884443] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 294.708569] ACPI: Power Button [PWRF] [ 295.025765] ata8.00: configured for UDMA/100 [ 295.076900] ata8: EH complete [ 295.112895] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 295.190028] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 295.264058] ata8.00: failed command: READ DMA [ 295.316261] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 295.316262] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 295.497635] ata8.00: status: { DRDY ERR } [ 295.545673] ata8.00: error: { ABRT } [ 295.599980] ata8.00: configured for UDMA/100 [ 295.651135] ata8: EH complete [ 295.686969] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 295.764066] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 295.838111] ata8.00: failed command: READ DMA [ 295.890313] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 295.890314] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 296.071688] ata8.00: status: { DRDY ERR } [ 296.119724] ata8.00: error: { ABRT } [ 296.174029] ata8.00: configured for UDMA/100 [ 296.225185] ata8: EH complete [ 296.261019] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 296.338122] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 296.412160] ata8.00: failed command: READ DMA [ 296.464367] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 296.464369] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 296.645740] ata8.00: status: { DRDY ERR } [ 296.693773] ata8.00: error: { ABRT } [ 296.748075] ata8.00: configured for UDMA/100 [ 296.799231] ata8: EH complete [ 296.835070] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 296.912174] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 296.986211] ata8.00: failed command: READ DMA [ 297.038418] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 297.038419] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 297.219803] ata8.00: status: { DRDY ERR } [ 297.267827] ata8.00: error: { ABRT } [ 297.322116] ata8.00: configured for UDMA/100 [ 297.373283] ata8: EH complete [ 297.409120] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 297.486221] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 297.560264] ata8.00: failed command: READ DMA [ 297.612469] ata8.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 297.612470] res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 297.793842] ata8.00: status: { DRDY ERR } [ 297.841880] ata8.00: error: { ABRT } [ 297.896180] ata8.00: configured for UDMA/100 [ 297.947347] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 298.033023] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 298.122347] Descriptor sense data with sense descriptors (in hex): [ 298.196599] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 298.274492] 00 00 00 00 [ 298.313698] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 298.395432] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00 [ 298.479253] end_request: I/O error, dev sdb, sector 0 [ 298.539789] Buffer I/O error on device sdb, logical block 0 [ 298.606556] Buffer I/O error on device sdb, logical block 1 [ 298.673319] Buffer I/O error on device sdb, logical block 2 [ 298.740084] Buffer I/O error on device sdb, logical block 3 [ 298.806855] ata8: EH complete [ 298.842700] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 298.919794] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 298.993832] ata8.00: failed command: READ DMA [ 299.046038] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 299.046040] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 299.226372] ata8.00: status: { DRDY ERR } [ 299.274407] ata8.00: error: { ABRT } [ 299.328718] ata8.00: configured for UDMA/100 [ 299.379871] ata8: EH complete [ 299.415706] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 299.492802] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 299.566845] ata8.00: failed command: READ DMA [ 299.619051] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 299.619052] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 299.799384] ata8.00: status: { DRDY ERR } [ 299.847421] ata8.00: error: { ABRT } [ 299.901717] ata8.00: configured for UDMA/100 [ 299.952877] ata8: EH complete [ 299.988712] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 300.065815] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 300.139855] ata8.00: failed command: READ DMA [ 300.192061] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 300.192062] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 300.372409] ata8.00: status: { DRDY ERR } [ 300.420431] ata8.00: error: { ABRT } [ 300.474719] ata8.00: configured for UDMA/100 [ 300.525891] ata8: EH complete [ 300.561725] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 300.638825] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 300.712866] ata8.00: failed command: READ DMA [ 300.765074] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 300.765075] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 300.945413] ata8.00: status: { DRDY ERR } [ 300.993444] ata8.00: error: { ABRT } [ 301.047732] ata8.00: configured for UDMA/100 [ 301.098902] ata8: EH complete [ 301.134739] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 301.211836] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 301.285880] ata8.00: failed command: READ DMA [ 301.338096] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 301.338097] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 301.518424] ata8.00: status: { DRDY ERR } [ 301.566455] ata8.00: error: { ABRT } [ 301.620753] ata8.00: configured for UDMA/100 [ 301.671913] ata8: EH complete [ 301.707753] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 301.784848] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 301.858893] ata8.00: failed command: READ DMA [ 301.911099] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 301.911100] res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error) [ 302.094660] ata8.00: status: { DRDY ERR } [ 302.142691] ata8.00: error: { ABRT } [ 302.196990] ata8.00: configured for UDMA/100 [ 302.248145] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 302.333833] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 302.423154] Descriptor sense data with sense descriptors (in hex): [ 302.497413] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 302.575299] 00 00 00 00 [ 302.614512] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 302.696244] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 302.780065] end_request: I/O error, dev sdb, sector 0 [ 302.840601] Buffer I/O error on device sdb, logical block 0 [ 302.907371] ata8: EH complete [ 316.741632] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 316.818764] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 316.892811] ata8.00: failed command: READ DMA EXT [ 316.949176] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 316.949177] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 317.129512] ata8.00: status: { DRDY ERR } [ 317.177545] ata8.00: error: { ABRT } [ 317.231847] ata8.00: configured for UDMA/100 [ 317.283004] ata8: EH complete [ 317.318842] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 317.395947] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 317.469981] ata8.00: failed command: READ DMA EXT [ 317.526349] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 317.526350] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 317.706684] ata8.00: status: { DRDY ERR } [ 317.754715] ata8.00: error: { ABRT } [ 317.809002] ata8.00: configured for UDMA/100 [ 317.860192] ata8: EH complete [ 317.896034] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 317.973134] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 318.047163] ata8.00: failed command: READ DMA EXT [ 318.103521] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 318.103522] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 318.283859] ata8.00: status: { DRDY ERR } [ 318.331889] ata8.00: error: { ABRT } [ 318.386191] ata8.00: configured for UDMA/100 [ 318.437349] ata8: EH complete [ 318.473185] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 318.550281] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 318.624323] ata8.00: failed command: READ DMA EXT [ 318.680692] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 318.680693] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 318.861025] ata8.00: status: { DRDY ERR } [ 318.909061] ata8.00: error: { ABRT } [ 318.963349] ata8.00: configured for UDMA/100 [ 319.014515] ata8: EH complete [ 319.050355] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 319.127453] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 319.201496] ata8.00: failed command: READ DMA EXT [ 319.257862] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 319.257863] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 319.438196] ata8.00: status: { DRDY ERR } [ 319.486231] ata8.00: error: { ABRT } [ 319.540521] ata8.00: configured for UDMA/100 [ 319.591687] ata8: EH complete [ 319.627525] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 319.704624] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 319.778668] ata8.00: failed command: READ DMA EXT [ 319.835049] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 319.835050] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 320.015368] ata8.00: status: { DRDY ERR } [ 320.063403] ata8.00: error: { ABRT } [ 320.117701] ata8.00: configured for UDMA/100 [ 320.168861] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 320.254545] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 320.343657] Descriptor sense data with sense descriptors (in hex): [ 320.417917] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 320.495803] 74 70 6d 00 [ 320.535008] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 320.616755] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 320.700575] end_request: I/O error, dev sdb, sector 1953524992 [ 320.770466] Buffer I/O error on device sdb, logical block 244190624 [ 320.845558] ata8: EH complete [ 320.881403] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 320.958492] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 321.032535] ata8.00: failed command: READ DMA EXT [ 321.088901] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 321.088902] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 321.269235] ata8.00: status: { DRDY ERR } [ 321.317268] ata8.00: error: { ABRT } [ 321.371572] ata8.00: configured for UDMA/100 [ 321.422723] ata8: EH complete [ 321.458566] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 321.535664] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 321.609706] ata8.00: failed command: READ DMA EXT [ 321.666071] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 321.666072] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 321.846408] ata8.00: status: { DRDY ERR } [ 321.894441] ata8.00: error: { ABRT } [ 321.948733] ata8.00: configured for UDMA/100 [ 321.999901] ata8: EH complete [ 322.035737] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 322.112841] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 322.186879] ata8.00: failed command: READ DMA EXT [ 322.243243] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 322.243244] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 322.423577] ata8.00: status: { DRDY ERR } [ 322.471614] ata8.00: error: { ABRT } [ 322.525915] ata8.00: configured for UDMA/100 [ 322.577071] ata8: EH complete [ 322.612907] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 322.690007] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 322.764050] ata8.00: failed command: READ DMA EXT [ 322.820418] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 322.820419] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 323.000761] ata8.00: status: { DRDY ERR } [ 323.048786] ata8.00: error: { ABRT } [ 323.103073] ata8.00: configured for UDMA/100 [ 323.154240] ata8: EH complete [ 323.190077] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 323.267176] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 323.341221] ata8.00: failed command: READ DMA EXT [ 323.397587] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 323.397588] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 323.577923] ata8.00: status: { DRDY ERR } [ 323.625956] ata8.00: error: { ABRT } [ 323.680246] ata8.00: configured for UDMA/100 [ 323.731410] ata8: EH complete [ 323.767250] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 323.844352] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 323.918392] ata8.00: failed command: READ DMA EXT [ 323.974758] ata8.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 323.974759] res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 324.155104] ata8.00: status: { DRDY ERR } [ 324.203129] ata8.00: error: { ABRT } [ 324.257415] ata8.00: configured for UDMA/100 [ 324.308582] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 324.394271] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 324.483591] Descriptor sense data with sense descriptors (in hex): [ 324.557848] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 324.635838] 74 70 6d 00 [ 324.675045] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 324.756792] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00 [ 324.840613] end_request: I/O error, dev sdb, sector 1953524992 [ 324.910502] Buffer I/O error on device sdb, logical block 244190624 [ 324.985592] ata8: EH complete [ 325.021504] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 325.098631] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 325.172676] ata8.00: failed command: READ DMA EXT [ 325.229041] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 325.229042] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 325.409376] ata8.00: status: { DRDY ERR } [ 325.457409] ata8.00: error: { ABRT } [ 325.511696] ata8.00: configured for UDMA/100 [ 325.562866] ata8: EH complete [ 325.601925] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 325.679039] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 325.753070] ata8.00: failed command: READ DMA EXT [ 325.809436] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 325.809437] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 325.989774] ata8.00: status: { DRDY ERR } [ 326.037814] ata8.00: error: { ABRT } [ 326.092107] ata8.00: configured for UDMA/100 [ 326.143263] ata8: EH complete [ 326.179101] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 326.256199] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 326.330241] ata8.00: failed command: READ DMA EXT [ 326.386610] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 326.386611] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 326.566944] ata8.00: status: { DRDY ERR } [ 326.614978] ata8.00: error: { ABRT } [ 326.669273] ata8.00: configured for UDMA/100 [ 326.720433] ata8: EH complete [ 326.756273] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 326.833371] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 326.907413] ata8.00: failed command: READ DMA EXT [ 326.963781] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 326.963782] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 327.144115] ata8.00: status: { DRDY ERR } [ 327.192150] ata8.00: error: { ABRT } [ 327.246439] ata8.00: configured for UDMA/100 [ 327.297630] ata8: EH complete [ 327.333452] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 327.410543] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 327.484585] ata8.00: failed command: READ DMA EXT [ 327.540955] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 327.540956] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 327.721298] ata8.00: status: { DRDY ERR } [ 327.769323] ata8.00: error: { ABRT } [ 327.823606] ata8.00: configured for UDMA/100 [ 327.874776] ata8: EH complete [ 327.910612] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 327.987713] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 328.061757] ata8.00: failed command: READ DMA EXT [ 328.118134] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 328.118136] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 328.298458] ata8.00: status: { DRDY ERR } [ 328.346492] ata8.00: error: { ABRT } [ 328.400779] ata8.00: configured for UDMA/100 [ 328.451946] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 328.537636] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 328.626955] Descriptor sense data with sense descriptors (in hex): [ 328.701215] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 328.779101] 74 70 6d a0 [ 328.818306] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 328.900053] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 328.983867] end_request: I/O error, dev sdb, sector 1953525152 [ 329.053764] Buffer I/O error on device sdb, logical block 244190644 [ 329.128864] ata8: EH complete [ 329.164691] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 329.241787] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 329.315831] ata8.00: failed command: READ DMA EXT [ 329.372197] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 329.372198] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 329.552534] ata8.00: status: { DRDY ERR } [ 329.600566] ata8.00: error: { ABRT } [ 329.654851] ata8.00: configured for UDMA/100 [ 329.706022] ata8: EH complete [ 329.741859] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 329.818962] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 329.893003] ata8.00: failed command: READ DMA EXT [ 329.949370] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 329.949371] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 330.129703] ata8.00: status: { DRDY ERR } [ 330.177738] ata8.00: error: { ABRT } [ 330.232018] ata8.00: configured for UDMA/100 [ 330.283203] ata8: EH complete [ 330.319031] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 330.396132] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 330.470175] ata8.00: failed command: READ DMA EXT [ 330.526542] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 330.526543] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 330.706875] ata8.00: status: { DRDY ERR } [ 330.754911] ata8.00: error: { ABRT } [ 330.809195] ata8.00: configured for UDMA/100 [ 330.860368] ata8: EH complete [ 330.896201] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 330.973304] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 331.047347] ata8.00: failed command: READ DMA EXT [ 331.103712] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 331.103714] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 331.284058] ata8.00: status: { DRDY ERR } [ 331.332081] ata8.00: error: { ABRT } [ 331.386369] ata8.00: configured for UDMA/100 [ 331.437537] ata8: EH complete [ 331.473374] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 331.550476] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 331.624519] ata8.00: failed command: READ DMA EXT [ 331.680884] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 331.680886] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 331.861222] ata8.00: status: { DRDY ERR } [ 331.909253] ata8.00: error: { ABRT } [ 331.963542] ata8.00: configured for UDMA/100 [ 332.014709] ata8: EH complete [ 332.050545] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 332.127647] ata8.00: irq_stat 0x00060002, device error via D2H FIS [ 332.201689] ata8.00: failed command: READ DMA EXT [ 332.258065] ata8.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in [ 332.258066] res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 332.438403] ata8.00: status: { DRDY ERR } [ 332.486433] ata8.00: error: { ABRT } [ 332.540719] ata8.00: configured for UDMA/100 [ 332.591879] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 332.677568] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] [ 332.766784] Descriptor sense data with sense descriptors (in hex): [ 332.841044] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 332.918928] 74 70 6d a0 [ 332.958142] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information [ 333.039770] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00 [ 333.123590] end_request: I/O error, dev sdb, sector 1953525152 [ 333.193489] Buffer I/O error on device sdb, logical block 244190644 [ 333.268577] ata8: EH complete [ 392.933330] fuse init (API version 7.13) [ 393.111691] kjournald starting. Commit interval 5 seconds [ 393.111840] EXT3 FS on sda1, internal journal [ 393.111845] EXT3-fs: mounted filesystem with ordered data mode. [ 396.198500] RPC: Registered udp transport module. [ 396.254865] RPC: Registered tcp transport module. [ 396.311225] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 396.452367] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 396.616120] svc: failed to register lockdv1 RPC service (errno 97). [ 396.708902] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 396.851020] NFSD: starting 90-second grace period [ 412.152589] tun: Universal TUN/TAP device driver, 1.6 [ 412.213081] tun: (C) 1999-2004 Max Krasnyansky [ 412.287604] tun0: Disabled Privacy Extensions