Linux version 2.6.32.16 (root@server) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Tue Jul 13 21:14:20 CEST 2010
Command line: root=/dev/mapper/root ro console=tty0
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000ebee0000 (usable)
 BIOS-e820: 00000000ebee0000 - 00000000ebee3000 (ACPI NVS)
 BIOS-e820: 00000000ebee3000 - 00000000ebef0000 (ACPI data)
 BIOS-e820: 00000000ebef0000 - 00000000ebf00000 (reserved)
 BIOS-e820: 00000000ec000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000214000000 (usable)
DMI 2.4 present.
last_pfn = 0x214000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FE0000000 write-back
  3 base 0E0000000 mask FF0000000 write-back
  4 base 0EC000000 mask FFC000000 uncachable
  5 base 100000000 mask F00000000 write-back
  6 base 200000000 mask FF0000000 write-back
  7 base 210000000 mask FFC000000 write-back
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000ec000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xebee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000ebee0000
 0000000000 - 00ebe00000 page 2M
 00ebe00000 - 00ebee0000 page 4k
kernel direct mapping tables up to ebee0000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000214000000
 0100000000 - 0214000000 page 2M
kernel direct mapping tables up to 214000000 @ c000-16000
RAMDISK: 37d72000 - 37fefb77
ACPI: RSDP 00000000000f6f00 00014 (v00 GBT   )
ACPI: RSDT 00000000ebee3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000ebee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000ebee3180 049F4 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000ebee0000 00040
ACPI: HPET 00000000ebee7cc0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000ebee7d40 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000ebee7bc0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000ebee7dc0 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000ebee8250 00275 (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0214000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 00018bcbc4]    TEXT DATA BSS ==> [0001000000 - 00018bcbc4]
  #3 [0037d72000 - 0037fefb77]          RAMDISK ==> [0037d72000 - 0037fefb77]
  #4 [000009c000 - 0000100000]    BIOS reserved ==> [000009c000 - 0000100000]
  #5 [00018bd000 - 00018bd0f6]              BRK ==> [00018bd000 - 00018bd0f6]
  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
  #7 [000000c000 - 0000011000]          PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000f5530] f5530
 [ffffea0000000000-ffffea00075fffff] PMD -> [ffff880028600000-ffff88002f9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00214000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009c
    0: 0x00000100 -> 0x000ebee0
    0: 0x00100000 -> 0x00214000
On node 0 totalpages: 2096764
  DMA zone: 56 pages used for memmap
  DMA zone: 112 pages reserved
  DMA zone: 3828 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 947992 pages, LIFO batch:31
  Normal zone: 15456 pages used for memmap
  Normal zone: 1115040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 23 pages/cpu @ffff880028200000 s71640 r0 d22568 u1048576
pcpu-alloc: s71640 r0 d22568 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2066860
Kernel command line: root=/dev/mapper/root ro console=tty0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8177076k/8716288k available (5579k kernel code, 329232k absent, 209028k reserved, 2281k data, 456k init)
Hierarchical RCU implementation.
NR_IRQS:320
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2133.136 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.27 BogoMIPS (lpj=21331360)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8532.95 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
xor: automatically using best checksumming function: generic_sse
   generic_sse:  7813.200 MB/sec
xor: using function: generic_sse (7813.200 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base ec000000 segment 0 buses 0 - 63
PCI: MCFG area at ec000000 reserved in E820
PCI: Using MMCONFIG at ec000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1a.0: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:1a.1: reg 20 io port: [0xc000-0xc01f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8100000-0xf81003ff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8101000-0xf81013ff]
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407]
pci 0000:00:1f.2: reg 14 io port: [0xd800-0xd803]
pci 0000:00:1f.2: reg 18 io port: [0xdc00-0xdc07]
pci 0000:00:1f.2: reg 1c io port: [0xe000-0xe003]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8102000-0xf81027ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf8103000-0xf81030ff]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:00:1c.0: bridge io port: [0x7000-0x7fff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xf1004000-0xf100407f]
pci 0000:02:00.0: reg 18 64bit mmio: [0xf1000000-0xf1003fff]
pci 0000:02:00.0: reg 20 io port: [0x8000-0x807f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.1: bridge io port: [0x8000-0x8fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf3000000-0xf3003fff]
pci 0000:03:00.0: reg 18 io port: [0x9000-0x90ff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x9000-0x9fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:04:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10 io port: [0xa000-0xa007]
pci 0000:04:00.1: reg 14 io port: [0xa400-0xa403]
pci 0000:04:00.1: reg 18 io port: [0xa800-0xa807]
pci 0000:04:00.1: reg 1c io port: [0xac00-0xac03]
pci 0000:04:00.1: reg 20 io port: [0xb000-0xb00f]
pci 0000:00:1c.5: bridge io port: [0xa000-0xbfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf80fffff]
pci 0000:05:00.0: reg 10 32bit mmio pref: [0xf7000000-0xf7ffffff]
pci 0000:05:00.0: reg 14 32bit mmio: [0xf4000000-0xf4003fff]
pci 0000:05:00.0: reg 18 32bit mmio: [0xf5000000-0xf57fffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xf6ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf7000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1   1701 MB/s
raid6: int64x2   2338 MB/s
raid6: int64x4   1753 MB/s
raid6: int64x8   1605 MB/s
raid6: sse2x1    3782 MB/s
raid6: sse2x2    4214 MB/s
raid6: sse2x4    6384 MB/s
raid6: using algorithm sse2x4 (6384 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x290-0x29f has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:08: ioport range 0x400-0x4bf could not be reserved
system 00:09: iomem range 0xec000000-0xefffffff has been reserved
system 00:0a: iomem range 0xd2000-0xd3fff has been reserved
system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
system 00:0a: iomem range 0xebee0000-0xebefffff could not be reserved
system 00:0a: iomem range 0x0-0x9ffff could not be reserved
system 00:0a: iomem range 0x100000-0xebedffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: 0x7000-0x7fff
pci 0000:00:1c.0:   MEM window: 0xf8200000-0xf83fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f8400000-0x000000f85fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: 0x8000-0x8fff
pci 0000:00:1c.1:   MEM window: 0xf0000000-0xf1ffffff
pci 0000:00:1c.1:   PREFETCH window: 0xf8600000-0xf87fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4:   IO window: 0x9000-0x9fff
pci 0000:00:1c.4:   MEM window: 0xf2000000-0xf3ffffff
pci 0000:00:1c.4:   PREFETCH window: 0xf8800000-0xf89fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5:   IO window: 0xa000-0xbfff
pci 0000:00:1c.5:   MEM window: 0xf8000000-0xf80fffff
pci 0000:00:1c.5:   PREFETCH window: 0x000000f8a00000-0x000000f8bfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf4000000-0xf6ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000f7000000-0x000000f7ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x7000-0x7fff]
pci_bus 0000:01: resource 1 mem: [0xf8200000-0xf83fffff]
pci_bus 0000:01: resource 2 pref mem [0xf8400000-0xf85fffff]
pci_bus 0000:02: resource 0 io:  [0x8000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf1ffffff]
pci_bus 0000:02: resource 2 pref mem [0xf8600000-0xf87fffff]
pci_bus 0000:03: resource 0 io:  [0x9000-0x9fff]
pci_bus 0000:03: resource 1 mem: [0xf2000000-0xf3ffffff]
pci_bus 0000:03: resource 2 pref mem [0xf8800000-0xf89fffff]
pci_bus 0000:04: resource 0 io:  [0xa000-0xbfff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf80fffff]
pci_bus 0000:04: resource 2 pref mem [0xf8a00000-0xf8bfffff]
pci_bus 0000:05: resource 1 mem: [0xf4000000-0xf6ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf7000000-0xf7ffffff]
pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:05:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 2550k freed
Intel AES-NI instructions are not detected.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
fuse init (API version 7.13)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 15977
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for ghash (ghash-generic)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000ebee81c0 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
processor LNXCPU:01: registered as cooling_device1
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xf8102000 port 0xf8102380 irq 28
ahci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000100 irq 17
ata8: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000180 irq 17
sata_sil24 0000:02:00.0: version 1.1
sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sil24 0000:02:00.0: setting latency timer to 64
scsi8 : sata_sil24
scsi9 : sata_sil24
ata9: SATA max UDMA/100 host m128@0xf1004000 port 0xf1000000 irq 17
ata10: SATA max UDMA/100 host m128@0xf1004000 port 0xf1002000 irq 17
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi10 : pata_jmicron
scsi11 : pata_jmicron
ata11: PATA max UDMA/100 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 18
ata12: PATA max UDMA/100 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 18
Intel(R) Virtual Function Network Driver - version 1.0.0-k0
Copyright (c) 2009 Intel Corporation.
sky2 driver version 1.25
sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:03:00.0: irq 29 for MSI/MSI-X
sky2 eth0: addr 00:1a:4d:40:ee:ba
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8100000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.16 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8101000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.16 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 2
it87: in3 is VCC (+5V)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
rtc_cmos 00:03: setting system clock to 2010-07-13 20:00:14 UTC (1279051214)
input: AT Translated Set 2 keyboard as /class/input/input3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7
ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata9.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/100
scsi 8:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00020002, device error via D2H FIS
ata9.00: failed command: READ FPDMA QUEUED
ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
         res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x401 (device error) <F>
ata9.00: status: { DRDY }
ata9.00: configured for UDMA/100
ata9: EH complete
ata10: SATA link down (SStatus 0 SControl 0)
ata9.00: NCQ disabled due to excessive errors
ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata9.00: failed command: READ FPDMA QUEUED
ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata9.00: status: { DRDY }
ata9: hard resetting link
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00020002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata9: EH complete
 unable to read partition table
sdb: detected capacity change from 0 to 1000204886016
sd 8:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 456k freed
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
Buffer I/O error on device sdb, logical block 244190624
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
Buffer I/O error on device sdb, logical block 244190624
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
Buffer I/O error on device sdb, logical block 244190644
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
ata9: EH complete
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
REISERFS (device dm-0): using ordered data mode
REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device dm-0): checking transaction log (dm-0)
REISERFS (device dm-0): Using r5 hash to sort names
udevd version 125 started
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
         res 51/04:20:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 20 00
end_request: I/O error, dev sdb, sector 0
__ratelimit: 5 callbacks suppressed
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA
ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
Buffer I/O error on device sdb, logical block 244190624
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:00:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:00:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d 00 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d 00 00 00 08 00
end_request: I/O error, dev sdb, sector 1953524992
Buffer I/O error on device sdb, logical block 244190624
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
Buffer I/O error on device sdb, logical block 244190644
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
ata9: EH complete
ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata9.00: irq_stat 0x00060002, device error via D2H FIS
ata9.00: failed command: READ DMA EXT
ata9.00: cmd 25/00:08:a0:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 in
         res 51/04:08:a0:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error)
ata9.00: status: { DRDY ERR }
ata9.00: error: { ABRT }
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        74 70 6d a0 
sd 8:0:0:0: [sdb] Add. Sense: No additional sense information
sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a0 00 00 08 00
end_request: I/O error, dev sdb, sector 1953525152
Buffer I/O error on device sdb, logical block 244190644
ata9: EH complete
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
tun0: Disabled Privacy Extensions